KLD802 80G FM Radar Level Sensor
Introduction
The 80GHz continuous frequency modulated wave radar has a narrower
beam angle, which can better penetrate the space between the mixing
blades and the tank wall, and reduce the interference caused by the
mixing blades;
The radar adopts spherical lens, which is not easy to hang large
area of condensation, and has obvious advantages in measuring
condensation environmental conditions combined with proprietary
algorithms;
The radar has a highly stable algorithm, which can stably track the
liquid level measurement such as liquid level splash, splash and
eddy current caused by mixing and spoiler.
Feature
With temperature compensation, we can obtain the true value of strain borne on the object. The coefficient of thermal expansion of the sensing element in
the strain gauge causes elongation or contraction of it. The
changes in temperature make unwanted changes in the sensing element
length and this causes error in strain reading.
KLD802 
| Medium: non-corrosive liquid, slightly corrosive liquid
Measuring range: 0.1m~10/20/30/60/100m
Process connection: flange ≥ DN80
Process temperature: -40～110℃
Process pressure: -0.1～1.6MPa
Antenna size: 32mm lens antenna
Antenna material: PTFE
Accuracy: ±1mm (range below 35m)
±5mm (range between 35m and 100m)
Protection class: IP67
Center frequency: 80GHz
Launch angle: 3°
Power supply: two-wire /DC24V
four-wire /DC12~24V
four-wire /AC220V
Casing: aluminum/sainless steel
Signal output: two-wire /4...20mA/HART protocol
four-wire / 4...20mA/ RS485 Modbus |
Installation
1.Flange Installation
When using flange installation, the minimum distance between the
instrument and the tank wall should be 200mm.
① datum plane
② vessel center or axis of symmetry
2.Hoisting Installation
Installation Requirements
When installing the instrument, avoid installing it above the
material inlet, and try to avoid various objects that affect the
signal, such as stirring paddles, etc.
Under extremely complex working conditions, the instrument can work
normally if there is no obstacle in the area with a radius of 20cm
centered on the installation point.
Installation connection diagram:
The maximum installation spool height H max depends on the
installation spool diameter D and the size of the product launch
angle.
Too long installation connection will affect the radar performance.
Dimensions
Casing Dimension
Unit in mm:
Production:
Xi'an Kacise Optronics Tech Co., Ltd considers itself a solution
provider and manufacturer. We offer maximum flexibility and a
cost-optimised offer for our OEM customers.
What we could provide:
The range includes customized shell version/color, thread
type(G-Thread/NPT Thread), Customized Software, prints, manual and
catalog. If you are interested in installing at your side, Radar
Module is available for sure.
