Aluminum Truss Display Lifting System/Sleeve Block/Top Section
1.It is suitable for all kind of aluminum truss and stage
accessories;
2.High quality and light weight;
3.Assembling the accurate positioning, simple, convenient and fast
removal;
4.Perfect craftsmanship.
Instruction For Installation
Step 1: Put the base on the ground according to the dimention of
the truss.
Step 2:Install the hinge on the base.
Step 3:Put the hinge into the sleeve.
Step 4:Make the pillar connect with the hinge ,put the top of the
pillar on the ground ,then install the top section and the hand
chain hoist .
Step 5:Complete all pillars according to above steps.
Step 6: The cross beams are connected to the sleeve which form the
top shape.
Step 7: The belt is tied the beam and then hung on the hoist .
Step 8:Pulling the hoists at the same time , making the beams
balanced rise.
Step 9: Install the assist legs.
Step 10: Disassembly in reverse order .
Characteristic of Spigot Truss
This is one of mudium-sized ,6082/ T6 Aluminum material ,with the
advantages of beautiful appearance ,small volume and eay to se up
.Used for some medium performances .
Other irrgular shapes can be customized according to customers
requirements .
