Closed Loop Control Electronic Brinell Hardness Tester with
Vertical Space 220mm
Brief Introduction:
Iqualitrol HBE-3000A electronic Brinell hardness tester adopts
advanced electronic sensor loading technology. Through the
closed-loop control system, the CPU controls the sensor to collect
signals.
The stepping motor automatically loads and unloads the test force,
and can automatically compensate the test force to ensure the force
value accurately, the indication is more stable.
After the indentation is measured through the eyepiece, the length
of the indentation is directly input to obtain the hardness value,
which improves the working efficiency.
At the same time, it is equipped with an emergency stop device,
which complies with the EU CE safety standard, has more reliable
operation and safety, and has high cost performance. It is widely
used in factory workshops, universities, research institutes,
laboratories, etc.
Features:
1. Equipped with precision sensor and CPU microcomputer control
system, it can be automatically compensated, and the test result is
accurate and stable;
2. With 10 levels of test force, the test range is wider;
3. After the indentation is measured through the eyepiece, the
hardness of the indentation length is directly input by the button
to improve the working efficiency;
4, equipped with a built-in printer, can analyze and print the
measurement data.
5, equipped with high-performance stepper motor automatic loading
and unloading test force, the noise generated during the test
process is smaller;
6. The shell is cast once, the structure is stable and not
deformed, and it can work under relatively harsh environment;
7. The surface is treated with automobile paint, which has strong
scratching ability and is still bright and new for many years;
8. This machine can be equipped with Brinell image measurement
software to greatly improve work efficiency.
Application:
1. Suitable for hardness test with large grain metal materials,
which can reflect the comprehensive performance of materials;
2, cast iron, steel, non-ferrous metals, alloys, especially for
softer metals, such as pure aluminum, lead, tin, etc.
3, can be used for the determination of hard plastics, bakelite and
other non-metallic materials hardness tester
Technical Specifications:
| Model | Iqualitrol HBE-3000A |
| Brinell Scales | HBW2.5/62.5, HBW2.5/187.5, HBW5/62.5, HBW5/125, HBW5/250, HBW5/750,
HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000 |
| Test force | 62.5kgf(612.9N), 100kgf(980.7N), 125kgf(1226N), 187.5kgf(1839N),
250kgf(2452N), 500kgf(4903N), 750kgf(7355N), 1000kgf(8907N),
1500kgf(14710N), 3000kgf(29420N) |
| Load control | Automatic (loading/dwell/unloading) |
| Maximum height of the test piece | 220mm |
| Length resolution | 0.005mm |
| Dwell Time | 0~60s |
| Hardness test range | 8~650HBW |
| Total magnification | 20X |
| Executive standards | EN ISO 6507, EN ISO 6506, ASTM E-384, ASTM E-10-08, ASTM E-384
GB/T231.2,JJG150 |
| Throat depth | 135mm |
| Indenter-upper wall distance | 55mm (can increase the pressure from the indenter to the upper wall
by customizing the indenter) |
| Hardness reading | After the indentation is measured through the eyepiece, the length
of the indentation is directly input by the button to obtain the
hardness value. |
| Data output | Built-in printer, print content: test conditions, number of
measurements, average, maximum, minimum, maximum error, etc. |
| power supply | AC220+5%, 50~60Hz |
| Dimensions | 520*210*745mm |
| weight | About 120kg |
