EPC series video lightning protectors are designed to protect
equipment using coaxial cables for communication and computer
systems from atmospheric overvoltage or damage due to elevated
ground potential. The product not only provides two levels of fine
protection with low residual voltage between core and shield, but
also provides high energy common mode protection to ground in core
and shield respectively. Its protection objects include: computer
Ethernet system, coaxial communication transmission system, CATV,
CCTV, camera monitoring system, etc.
Product Model EPC50-2000N
Continuous working voltage Uc 75V
SPD test category C2
Rated discharge current Isc (8/20μs) 10kA
Voltage protection level Max 0.5kV
Operating frequency 50MHz~2000MHz
Insertion loss ＜0.5dB
Size Φ25mm×70mm
VSWR ≤1.2
Interface type/characteristic impedance N/50Ω
Housing material stainless steel
Operating environment conditions
Temperature range: -40℃~+70℃.
Humidity range. 30%~85% (25℃)
Adopt multi-stage protection circuit, core components are selected
from international stable performance.
● With large through-current capacity, low signal port clamp
voltage, low insertion loss, sensitive response, etc.
● It has the features of easy installation, no special maintenance
and long service life.
Connection method
1,Connect in series with the coaxial cable line, the "IN" end can
be inserted into the coaxial cable inlet connector and the "OUT"
end into the coaxial cable outlet connector.
2,Connect the ground wire to a nearby reliable grounding body.
Caution
1,This product is only suitable for indoor use.
2,Do not install in thunderstorm.
