General Description
EPP10MS power supply lightning protection socket is used for power
protection of small distribution equipment with indoor 220VAC power
supply, such as computer network, precision equipment, small
machine room, bank savings, office, monitoring machine room and
power protection of various power equipment; equipped with three
multi-purpose output jacks, independent switch and internal fault
indication.
Adopt multi-level protection circuit, core components selected from
international ****, stable performance.
Large through-current capacity, low port clamp voltage and
sensitive response.
Easy installation, no special maintenance, long service life.
Aging thermal decoupling and short-circuit overcurrent decoupling,
with visual warning of indicator light.
Technical parameters
Model
EPP10MS
Applicable grid
220VAC (50Hz)
SPD test grade
T2
**** Continuous operating voltage Uc
275VAC
Rated discharge current In(8/20μs)
5kA
**Maximum discharge current Imax(8/20μs)
10kA
Voltage protection level up [L-PE/N-PE/L-N
1.5kV/0.6kV/1.0kV
Enclosure material
White flame retardant plastic
Protection mode
Full protection
Size specification
176mm×73mm×38mm
Functional features
Independent jack introduction structure, flame retardant and
insulated
Working environmental conditions
Temperature range: -40℃～+70℃ Humidity range: 30%～85% (25℃)
Model extension. In=10kA extension type is available.
Caution
1,The rated load current of lightning protection socket is 10A.
2,The grounding wire between the machine room or independent
equipment should be as thick and short as possible, and the
grounding resistance should be less than 4Ω.
