| Temperature range | -70ºC~+100ºC(150ºC)(A:+25ºC B:0ºC C:-20ºC D:-40ºC E:-50ºC F:-60ºC
G:-70ºC) |
| Humidity range | 20%-98%R.H. (10%-98%R.H/5%-98%R.H are special selection conditions) |
| Temperature and humidity resolution accuracy/uniformity | ±0.1°CC;±0.1%R.H./±1.0°C: ±3.0%R.H. |
| Temperature and humidity control accuracy / fluctuation | ±1.0°C; ±2.0%R.H./±0.5°C; ±2.0%R.H. |
| Temperature Rising/Falling Time | approx. 4.0°C/min; approx. 1.0°C/min (5-10°C drop per minute for
special selection conditions) |
| Material of internal and external parts | Exterior: Premium cold plate nano-baked lacquer
Interior: stainless steel |
| Insulation material | High temperature resistant high density ethylene chloride-based
vinyl acetate foam insulator material |
| Cooling system | Air-cooled/single stage compressor (-20°C),air and
water-cooled/double stage compressor (-40°C-70°C) |
| Protection devices | Fuseless switch, compressor overload protection switch, refrigerant
high and low pressure protection switch, over humidity and over
temperature protection switch, fuse, fault warning system |
| Accessories | Viewing window, 50 mm test hole, PL box interior light, divider,
wet and dry ball gauze |
| Controllers | TEMI, TH-900C (South Korean) /OYO (Japan) |
| Compressors | Tecumseh |
| Power supply | 1Φ220VAC±10% 50/60Hz &3Φ380VAC±10%50/60Hz |
FAQ:
1. Do you offer after-sales service? How can I ask for that? And
how about the warranty?
A:Every machine from our factory has a 14-month warranty after
shipment. Generally, we offer 12 months for the FREE maintenance,
while
considering of sea transportation, we can extend 2 months for our
customers.
If your machine doesn't work, you can send E-mail to us and we will
try our best to find the problem by email or video chat if
neccesary.
After confirmation of the problem, we can send you new spare parts
or provide on-site repair.
2. What's the delivery term?
A:At most of time, we have stock in the factory. If there is no
stock, normally, the delivery time is 15-20 working days after
deposit receipt. If you are in urgent need, we can consider making a special arrangement for
you.
3. Do you accept customization service? Can I have my logo on the
machine?
A:Yes, of course. We can not only offer standard machines, but also
customized machines according to your requirements. And we can also put
your logo on the machine.
4. How to install and use the product?
A:We will send you operating instructions, English video by Email.
Or you can download on our officail website directly.Most of our machine is
shipped with a whole part, which means it is already installed, all
you need to do is to connect the power cable and start to
use. And if possible, we can also install your machine at site.
