Instruction for use of Safety Multi-sample needle
ISO CCE Approved Vacuum Venous Blood Collection Safety Multi-Sample
Needle
1. Usage: Used in routine blood collection and used together with
Vacuum Blood Collection Tubes for Single use.
2. Characteristics: Safe and operative is key principle for design
of SANLI Blood Collection Needles. All Blood Collection Needles are
sterilized by ethylene oxide which assures products asepsis,
innocuity, non-pyrogenic.
3. Reference Number SIZE Color
Gauge x Needle Length Needle Diameter x Needle Length
4. Venipuncture Instructions:Safety Multi-sample needle and holder
picture
Step 1: Place patient’s arm in a downward position and clean
venipuncture site with alcohol; Step 2: Apply tourniquet;
Step 3: Remove the upper cover of Safety multi-sample needle and
assemble the needle in holder; Perform venipuncture with arm
downward and tube stopper upper-most;
Step 4-5: Push tube onto needle, puncturing stopper diaphragm;
Step 6: Release tourniquet as soon as blood appears
in tube and remove tube from holder when first tube has filled to
its stated volume and blood flow ceases;
Step 7: Turn the filled tube upside-down and return it to upright
positions and repeat this inversion according to different additive
performance;
Step 8: Place succeeding tubes in holder, puncturing diaphragm to
begin follow, see Recommended Order of Draw;
Step 9: As soon as blood stops flowing in the last tube, remove
tube from holder and remove needle from Vein, applying pressure to
puncture site with dry sterile swab until bleeding stops;
Step 10: Dispose the Safety multi-sample needles into Sharps
Disposal Containers according to related policies and guidelines.
