Pulley Continuous Wire Drawing Machine / Water Tank Type Wire
Drawing Machine
Pulley Continuous Wire Drawing Machine
Our pulley continuous wire drawing machine has advantages of simple
structure, low price and convenient operation, and is suitable for
drawing medium thin metal wires, especially mild steel wire,
galvanized iron wire, type wire, stainless steel wire, rubber tube
wire, spring wire, welding rod solder wire and copper wire aluminum
rod.
Application Scope: Gas-shielded welding wire, welding rod wire,
stainless steel wire, galvanized iron wire, medium and high carbon
steel wire, copper wire and metal product wire.
Main Technical Parameters
| Specification | Drawing Passes | Maximum Inlet Wire
MM | Minimum Outgoing Wire
MM | Motor Power
KW | Speed
M/S | Drive Mode |
| 650 | 1-4 | 8.00 | 4.00 | 22-15 | 2 | Gear Drive |
| 560 | 1-7 | 6.50 | 2.00 | 22-11 | 6 | Gear Drive |
| 450 | 1-7 | 3.50 | 1.20 | 18.5-15 | 7 | Gear Drive |
| 400 | 6-8 | 2.50 | 0.80 | 11-15 | 18 | V-belt Drive |
| 360 | 1-7 | 2.50 | 0.60 | 11-7.5 | 8 | Gear Driv |
Water Tank Wire Drawing Machine
Our water tank wire drawing machine is used for drawing low, medium
and high carbon steel wire, stainless steel wire, prestressed wire
and alloy steel wire and suitable for cord steel wire, rubber tube
wire, spring wire, temper type wire, gas shielded welding wire and
stainless steel wire.
| Maximum Inlet Wire | Ф6.5mm |
| Minimum Outgoing Wire | Ф3.5mm |
| Single Motor Power | 90Kw 6 Stage Slip Ring Motor |
| Gross Weight | 6T |
| Drawing Passes | 8 Passes |
| Speed | 5m/second |
| Total Compression Ratio | 80% |
| Average Partial Compression Ratio | 15% |
| Maximum Inlet Wire | Ф3.5mm |
| Minimum Outgoing Wire | Ф1.4mm |
| Single Motor Power | 55Kw 6 Stage Slip Ring Motor |
| Gross Weight | 3T |
| Speed | 5m/second |
| Total Compression Ratio | 75% |
| Average Partial Compression Ratio | 15% |
