Low Vibration Jaw Rock Crusher Small Output Crushing Of Hard Block
Materials
Equipment Description
This Jaw Rock Crusher adopts the single pendulum design principle,
with simple structure, small volume and the smallest output in this
series. It is widely used for crushing various ores and bulk
materials in mining and smelting, building materials, highways,
railways, water conservancy and chemical industries. The maximum
compressive strength of the crushed material is 325Mpa. The
specific parameters of this device are as follows.
1. The size of the feeding port of the equipment is 250 * 400 mm,
and the maximum feeding particle size is 210 mm.
2. The adjustment range of the discharge port of the equipment is
20-80 mm.
3. The production capacity of the equipment is 5-20 tons per hour.
4. The motor power used by the equipment is 15 kW.
5. The rotating speed of eccentric shaft during equipment operation
is 300 rpm.
6. The weight of the equipment is 2.8 tons.
Technical Reference Data
| Model | Feed port size (mm) | Maximum feed particle size (mm) | Adjustment range of outlet (mm) | Production capacity (t/h) | Power (kw) | Rotating speed (r/min) | Weight (t) |
| XCE2540 | 250*400 | 210 | 20-80 | 5-20 | 15 | 300 | 2.8 |
| XCE4060 | 400*600 | 340 | 40-100 | 16-54 | 30 | 275 | 6.5 |
| XCE5075 | 500*750 | 425 | 50-100 | 30-85 | 55 | 275 | 10.3 |
| ※XCE40108 | 400*1080 | 340 | 40-100 | 30-100 | 75 | 250 | 10.8 |
| ※XCE5013 | 500*1300 | 425 | 50-120 | 50-150 | 90 | 275 | 15.6 |
| ※XCE5015 | 500*1500 | 425 | 50-120 | 60-185 | 110 | 275 | 18.3 |
| ※XCE5712 | 570*1200 | 475 | 50-130 | 80-210 | 132 | 275 | 17.8 |
| XCE6090 | 600*900 | 500 | 65-160 | 50-150 | 75 | 250 | 15.5 |
| XCE75106 | 750*1060 | 630 | 80-140 | 50-208 | 110 | 250 | 27.5 |
| XCE9012 | 900*1200 | 750 | 95-165 | 100-238 | 132 | 200 | 50 |
| XCE1012 | 1000*1200 | 850 | 105-175 | 295-350 | 160 | 200 | 52 |
| XCE1215 | 1200*1500 | 1020 | 150-300 | 300-800 | 220 | 180 | 100.8 |
Jaw Rock Crusher Related Information
Jaw Crusher is a commonly used crushing equipment. Its main
features and advantages are as follows:
Groove design: The jaw crusher adopts a groove design, with larger inlet and
outlet, and can handle larger-sized materials. At the same time,
the groove design also facilitates the uniform distribution of
materials in the crushing cavity, reducing the possibility of
blockage and accumulation.
Enhanced upper swing shaft: The upper swing shaft of the jaw crusher adopts an enhanced
design, which has higher strength and wear resistance and can
better cope with the crushing requirements of high-strength and
high-hardness materials. This design can effectively extend the
service life of the equipment and reduce maintenance costs.
Adjustable discharge port: The jaw-type discharge port can control the particle size of the
material by adjusting the width of the discharge port. This
adjustable discharge port design enables the jaw to adapt to a
wider range of crushing requirements and meet the user's product
needs of different particle sizes.
Simple structure and high reliability: The structure of the jaw crusher is relatively simple, consisting
of fewer parts, and its maintenance and repair is relatively
convenient. In addition, its working principle is relatively
simple, its reliability is high during use, and it can ensure
stable operation for a long time.
Low energy consumption and high efficiency: The jaw crusher has relatively low power consumption and high
energy utilization efficiency. At the same time, it has a large
crushing ratio, can complete material crushing in a short time, and
improves production efficiency.
Wide application: The jaw crusher is suitable for crushing various materials with
different hardness and strength, including ores, building
materials, metallurgical ores, etc. This makes it widely used in
mining, metallurgy, construction and other industries, and has
great market demand.
Our History
