0.9 Power Factor Pure Sine Wave High Frequency Online UPS with
50/60Hz Frequency Conversion
Multifunction friendly design
Advanced parallel technology
1. Stable parallel control technology make sure current sharing to
1%
2. Select trip technology can avoid and isolation system fault then
improved system availability
3. Flexible extension capacity and redundance management that can
satisfy all kinds of requirements
4.Support maximum 3 units for parallel working Flexible strategy
5.On line mode provides higher system availability
6.High efficiency mode provides more economic operation
7.Frequency conversion provides more stable output
Brief Introduction
1.Battery voltage can be choice depend on capacity , can satisfy
different requirement.
2.Convenience to get more back up time and lower system invests
3.Convenience to save cost of battery
4.Intelligent battery monitors Charge current can be adjust
5.Standant charge current 4A
6.Support more discharge time and more capacity battery for 8A
charger Input topology design
7.Support three phase input or single phase input for three phase
UPS
8.Super wide input voltage and frequency range suitable for bad
power electirc environment
9.Digital control DSP technology and best power component make the
system safe and reliable
Main function
Output power factor up to 0.9
1.Output power factor is 0.9 that mean can take more load, if you
take same load that can get higher reliability.Input power factors
up to 0.99
2.Three phase input model support three phase PFC , input
THDI<5%
3.Output voltage regulation 1%, frequency regulation 0.1%, parallel
current sharing 1%.
The efficiency up to 94%
4.Efficiency up to 93.5%when take the 30%load
5.ECO mode efficiency up to 98%
Technical Parameters
| Model | HP9116C/HP9316C 10-20KVA PLUS |
| 10KT-XL | 15KT-XL | 20KT-XL |
| Rated Power | 10KVA/9KW | 15KVA/13.5KW | 20KVA/18KW |
| Rated Voltage | 220VAC/380VAC 3phase with ground |
| Rated Frequency | 40-70 Hz (50/60 Auto-sense) |
| Input |
| Voltage Range | Single phase: 120 ~ 275VAC ( 176-275VAC full load ) Three phase:
209-475VAC ( 304-475VAC full load) |
| Power Factor | >0.95(Three phase) | ≥0.99 |
| Output |
| Voltage Regulation | 208/220/230/240VAC (±1%) |
| Frequency Regulation | 50/60HZ±0.05 Hz |
| Power Factor | 0.9 |
| Voltage Distortion | Linear load＜2% ,Non-Linear load＜5% |
| Overload Capability | 105% ~ 125% for 10min; 125% ~ 150% for 30s,>150% for 500 ms |
| Current Crest Ratio | 3:01 |
| Transfer Time | 0ms (AC mode→Battery mode) |
| Battery |
| DC Voltage | 192VDC | 192/216V/240VDC |
| Recharge Current | 4A | 4A (8A optional) |
| Display |
| LCD | Display input/output Voltage, Frequency, Battery voltag, Battery
capacity, Loading rate. |
| Communication |
| Interface | Smart RS232,SNMP card (optional) USB (optional) |
| Environment |
| Operation Temperature | 0~40℃ |
| Humidity | 0~95% (Non-condensing) |
| Storage Temperature | -25℃~55℃ |
| Sea Level Elevation | ＜1500m |
| Noise Level (1m) | ＜55dB |
| Physics Characteristic |
| Weight(KG) | 16.9 | 31 |
| Dimensions :(Wx D x H)mm | 212X420X500 | 248X565X500 |
