FEATURES:
1.Suport 0/1-10V and Triac dimming signal, work with leading edge
and trailing edge dimmer
2.100% perfect match CBUS dimming system Such as Lutron,
Osram,Philips,Berker, Clipsal, ABB,Dynalite and so on
3.Overload & Short circuiting protection, Overheating protection;
4.Measure up to SELV
5.Dimming range 0--100%, LED start at 1% possible;
6.25,000 hours life time,3 Years Warranty
7.Slim size design
Related item:
(LED Dimmmable Power Supply)
Specification
| Model No. | JSD-250-12 | JSD-250-24 |
| Output | DC Voltage | 12V | 24V |
| Current Range | 0~20.8A | 0~10.4A |
| Power | 250W |
| Ripple And Noise | Max 150mVp-p |
| Voltage Tolerance | ±5% |
| Setup, Rise Time | 2000ms, 100ms / 230VAC |
| Input | Voltage Range | 170~260VAC/90-130V |
| Frequency Range | 50~60Hz |
| Efficiency | >0.85 |
| PF | 0.6 |
| Current | 1.7A/220VAC |
| Surge Current | 36A/220VAC |
| Leakage Current | Max 1mA/240VAC |
| Protection | Overload | Above 110%-150% of rated power |
| Shut-down output voltage, auto recovery after fault condition is
removed |
| Overvoltage | Above Max. Voltage (105% of rated voltage) |
| Shut-down output voltage, auto recovery after fault condition is
removed |
| Over temperature | 90℃ ± 5℃(5~12V) 80℃ ± 5℃(24V) |
| Shut-down output voltage, auto recovery after fault condition is
removed |
| Environment | Working Temp. & humidity | "-20°C~+60°C, 20%~90%RH |
| Storage Temp. & humidity | "-40°C~+85°C, 10%~95%RH |
| Safety | Withstand Voltage | I/P-O/P: 1.5KVAC/1min; I/P-F/G: 1.5KVAC/1min; O/P-F/G:
0.5KVAC/1min; |
| Safety | GB4943 ;IEC60950-1; EN60950-1 |
| EMC | EN55032:2015/AC:2016; EN61000-3-2:2014; EN61000-3-3:2013;
EN55024:2010+A1:2015 |
| LVD | EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 |
| Other | Cooling | fanless |
| Lifespan | 20000hrs |
| Dimensions (L*W*H) | 287*50*30mm |
| Weight | 470g, 50pcs/ctn |
| Note | 1. The above mentioned data were measured at 230VAC input and 25°C.
2. Dis-connect the AC input before checking any mal-phenomenons.
3. Make sure the INPUT&OUPUT were in right situation before
connected to power supply.
4. Datasheet for reference only. We suggest you take sampling
before mass orders. |
FAQ
1. Q: When can I get the price?
A: We usually quote within 24 hours after got your inquiry. If you
are urgent to get the prices,
please call us or tell us in your email so that we will give
priority to your inquiry .
2, Q: Do you accept the OEM&ODM?
A: Yes,OEM or ODM service are available.
3, Q: May I get samples to test quality and how long can I get
them?
A: Yes, quote of sample is same as normal order and can be ready in
3-5 days.
4, Q: What is the MOQ?
A: One piece is OK. Because any order is from sample.
5, Q: Can you accept small trial order?
A: Yes, no matter large or small trial order, your needs will get
our full attention. It’s our great honor to cooperate with you.
