Ruiming SZS Micro Injection Molding Machines Pneumatic For Laboratory

Ruiming SZS Laboratory Micro Injection Molding Machine

Sz-15 laboratory mini injection molding machine is a series of small injection machine for experiment developed recently by our company. Dumbbell spline products can be produced with a small amount of materials. The main performance index of the series of micro-injection machines used in the laboratory has reached the level of similar foreign products such as HAAKE MiniJet and DSM Xplore, but with high cost performance, it is an ideal substitute for imported products. Sz-15 micro injection molding machine main characteristics: small size, the main machine size is about 700×310×460(mm), can be directly placed on the experimental table; Material saving, low energy consumption, low experimental cost; Adopt pneumatic power source to keep the laboratory environment clean and hygienic; Injection pressure, strong clamping force; High degree of automation; The mould is made of stainless steel, and can be replaced with different moulds according to different splines to meet the requirements of various splines. It can be easily used with the laboratory mini twin screw extruder of our company to directly extrude the experimental material into the injection cylinder of the mini injection molding machine to produce spline products conveniently. Main technical parameters: Injection volume: Max 15g Weight :62 kg

Key Technical Parameters of Automatic Injection Molding Machine

Wuhan Ruiming Lab Instruments Co., Ltd was established in 2001, mainly produce various plastic mechanical equipment and polymer laboratory instruments. Due to the company development, a branch company was established in 2014 specializing in the production of polymer laboratory instruments. The products include mini extruder, mini injection machine, mini high tensile ratio spinning machine, mini tube extrusion unit, mini granule cutting unit and laboratory plastic bottle blowing machine, laboratory film blowing machine, 3D printing consumable unit and other series of products.

Our company has successfully developed laboratory mini twin screw Micro Compounders and laboratory mini injection molding machine series products which have leading level both at home and abroad. This series products have comparable or better technical specifications than our competitors similar products such as HAAKE MiniLab, MiniJet and DSM Xplore, and are more cost effective solutions for your R&D needs than our competitors similar products.