Long Durability Low Maintenance Cost Syrup / Jam Transport Lobe
Pump
Brief introduction :
In food production, there are often large particles and easily
broken material, such as strawberry pulp, jams containing coconuts,
jellies etc. ,So their technical requirement is that the material
cannot be squeezed and damaged, which leads to higher technical
requirements for the pump. Accuvon rotor pump has developed a
special design for the rotor for such working conditions, which
will not destroy the integrity of the pulp, but also ensure the
smooth delivery of materials.
Specifications:
| ACCUVON | rate of flow
l/rev | flow
(m³/h) | pressure
(Mpa) | speed
rpm | Flange diameter
DN mm | power
Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer
various flange connection according to your requirements
Advantages
1. Gap is kept between the rotors and rotors & pump body, no
friction, long using-life.
2. Simple assembling and disassembling, easy to maintenance and
clean, less easily-damaged parts.
3. High efficiency and energy-saving, low failure, reliable sealing
and low noise.
4. In the same type pump, different type rotor can be interchanged.
5. Capable to pump the viscous medium from 1cp to 2million cps.
6. Capable of pumping mixture of gas, fluid and solid medium.
7. Equipped with inverter, the flow can be adjusted as requirement
of end-user.
8. Flange, screw or clamp connection can be selected as required.
9. Higher hygienic grade, support CIP, SIP. The surface roughness
is 0.2--0.8um, got 3A, FDA certification.
10. Hygienic safety valve is built-in structure.
11. A control unit combined with a frequency inverter regulates the
speed of the pump so the liquid sugar is conveyed in doses from a
storage tank into the mixing container.
12.The pump is able to convey viscous product, is easy to service
and is resistant to pressure.
Working Principle of Rotary Lobe Pump:
The rotary lobe pumps we also called them lobe rotor pumps. They
are one popular transfer pump to conveying the food, beverage, pulp
and paper, chemical, pharmaceutical and so on. The rotor lobe pump
relies on two synchronously rotating rotors that generate suction
(vacuum) at the inlet during the rotation. Thereby sucking in the
material to be conveyed. Both rotors split the rotor chamber into
different spaces. Then operate in the order of 1-2-3-4. The medium
is delivered to the discharge port. In this cycle, the medium
(material) is continuously transported out by the source.
Quality inspection photos
