Dehumidifying Machine 3-In-1 Compact Dryer OCD-80/80H For Auto Plastic Parts

NAMING PRINCIPLE of Dehumidifying Hopper Dryer

OCD – xx/xxxH

① ② ③

① Orste “Three-in-one” Compact Dryer

② Hopper Capacity (L)

③ Dehumidifying Air Quantity (m³/hr)

H: Honeycomb Rotor Type

Product Features of Dehumidifying Hopper Dryer

1. The OCD compact dryers can be equipped with up to four fully insulated drying bins to suit the required total throughput.

2. OCD compact dryers are the most effective way of conditioning hygroscopic plastic granules for processing and removing surface moisture.

3. The use of corrosion resistant stainless steel ensures a long lifetime and avoids contamination of the plastic granules.

4. Transparent window design for filter makes it convenient to monitor the condition of filter.

5. Material-contact surface of hopper is specially made of dust-free mirror-like stainless steel, it is suitable for the production of optical lens or food standard plastic products production.

6. High-density return air filter ensures no contamination to the material in the conveying of materials.

7. For models below OCD-160/120H, air-cooling methods is applied, which ensures low energy-saving and convenient for movement.

Application of Dehumidifying Hopper Dryer

ORSTE “Optical” Dehumidifying Dryers provides the advantages of a consistent dew point and maximum energy efficiency. They combine the function of dehumidifying, drying and two-stage conveying into one compact machine, specified for the production of “optical class” and “food standard” products, such as lens, LGP, disposable lunch box etc. The quality desiccant honeycomb rotor provides continuous and constant low dew-point air which can be lower than -40 ^oC under ideal conditions.

Product Specification / Parameters of Dehumidifying Hopper Dryer

Product Details of Dehumidifying Hopper Dryer

The above part is a dust collector, it is an important part for the machine if there is much dust in the plastic materials. It can remove most of the dust like substance in the plastic and greatly improve the service lifespan of the machine.

The above part is an oil removing device. If the plastic material contains some oil-like substance, the oil-like substance can go back to the honeycomb rotor which can block the holes in it. Then the drying effect and performance of the machine will be reduced a lot. So in this circumtance, the oil removing device is needed.

Matters Needing Attention

Electrical installation of the machine should be done by qualified electricians.

Before connecting to AC Power Source, turn power switch to OFF position. While AC power source is connected, make sure specifications and overload protection rating of the power switch are suitable and reliable. When the machine is under care or maintenance, turn off both power switch and automatic operation switch.

1. A fully sealed type that eliminates the need for exhaust gas processing.

6. Safe and easy to operate because substances such as heavy oil and gas are not used.

Dongguan Orste Machinery Equipment Co., Ltd. was established in 2007 in “Made in China” City, Dongguan, Guangdong Province. After many years of growth and development, Orste has become a technology driven and innovative enterprise with independent development ability, integrating design, manufacturing, sales and maintenance.

We have been awarded ISO9001 certification. Orste now owns 1 manufacturing factory in Dongguan and 12 sales agent service centers in many cities in China including Tianjin, Jinan, Suzhou, Shanghai, Wenzhou, Fuzhou, Wuhan, Changsha, Chongqing and etc. With a foothold set in China, we are serving global markets. Orste devotes itself to improving the product quality and working environment in plastic factories by supplying integral automation systems to them.

With many years of experience and accumulation in Dehumidifying and Drying, Material Conveying, Heating and Cooling, Granulating and Recycling, Mixing and Blending, and upholding the principle of “Focusing on Product Details, Pursuing Excellent Quality”, Orste Machinery is an industry leader with its mature technology in peripheral equipment of plastic molding.

Orste’s large scale central material feeding system and cooling water circulation system including three major systems of centralized raw material drying, water temperature control and metering & mixing, are extensively applied in plastic injection molding industry. The main products of the company are a series of high-tech products including Dehumidifying Dryer, Hopper Dryer, Auto-loader, “Three-in-one” Compact Dryers, Water/ Oil Mold Temperature Controller, Industrial Cooling Machine, Granulator, Mixer, Masterbatch Doser and Vibrating Screen.

With the principle of customer satisfaction first, we take value contribution as our responsibility and constantly review the market adaptability of our products to timely seize the latest trend in industry, and maintain the uniqueness and technological edge of products. Through proactive listening, delicate service, modest attitude, Orste Machinery always maintains close contact with its customers.