3C5A Mindray Ultrasound Convex Array Probe For DC-N3 DC-3 DC-6
Ultrasound Machine
The frequency bandwidth of Mindray 3C5a convex ultrasonic
transducer is 2.5/3.5/5.0/H4.6/H6.0 MHz. The 3C5s probe is suitable
for adult abdominal, obstetrics, vascular and pediatric abdominal
imaging applications. This probe is compatible with the Mindray
DC-N3 console ultrasound machine.
Specification
| Product Name | Mindray 3C5A Ultrasound Convex Array Probe for DC-N3 DC-3 DC-6
ultrasound machine
|
| Brand | Mindray |
| Part No. | 3C5A |
| Type | Convex Array
|
| frequency bandwidth | 2.5/3.5/5.0/H4.6/H6.0 MHz |
| Applications | adult abdomen, OB/GYN, vascular and pediatric abdominal imaging
applications |
| Compatible for | DC-N3 DC-3 DC-6 ultrasound machine
|
The sensor is classified as "IPX7" according to the degree of
protection against harmful ingress of water (from the sensor head
to the cable protector).
The connectors are not waterproof and must not be immersed in
liquids such as disinfectants.
The transducer is as shown below
| No. | Name | Function |
| <1> | Transducer head | Converts electrical signals into ultrasonic and focuses the sound
beam in a certain direction; At the same time, it receives
reflected ultrasonic signals, converts them into electrical signals
and transmits them through cables. The lens on the surface is an
acoustic lens. Apply ultrasonic gel to the acoustic lens for it to
work properly. |
| <2> | Needle-guided bracket fix tabs and grooves | Provides mounting support of the needle-guided bracket. |
| <3> | Transducer cable | Transmits electrical signals between the transducer body and
connector |
| <4> | Transducer connector | Connects the transducer and cable to the ultrasonic diagnostic
system. |
| <5> | Lock handle | Locks the connector to the ultrasonic diagnostic system. |
Tips: The transducers’ structure marked in the figure above may
vary with the matched needle-guided brackets.
Connecting and Disconnecting the Transducer
For non-portable Doppler Ultrasound System Compliant Transducer
Connect the converter:
After freezing or shutting down the ultrasound system, align the
connector with the ultrasound system's transducer port and rotate
the locking handle 90° clockwise to lock securely. See below:
Disconnect the sensor:
After the system freezes or shuts down, rotate the locking handle
90° counterclockwise to unlock the transducer. Pull the connector
straight out to remove it.
See below:
For Portable Doppler Ultrasound System Compliant Transducer
Connect the converter:
To connect the transducer, push the plug into the socket until it
stops. Move the transducer lock lever, located next to the jack, to
the up position. See below.
Disconnect the sensor:
To disconnect the transducer, move the transducer locking lever to
the down position and pull the transducer steadily out of the
socket. See below.
If you're interested in 3C5A Mindray Ultrasound Convex Array Probe For DC-N3 DC-3 DC-6
Ultrasound Machine ,feel free to contact us .Thank you .
