Welch Allyn Vital Signs Monitor 300 Series 53NTP Plastic Cover
Patient Monitor Parts Welch Allyn Vital Signs Monitor 300 Series
53NTP Plastic Cover in good working conditionl
► Brief Introduction
The Welch Allyn Vital Signs Monitor 300 Series 53NTP series of
monitors are intended to be used by clinicians and medically
qualified personnel for monitoring of noninvasive blood pressure,
pulse rate, body temperature, noninvasive functional oxygen
saturation of arteriolar hemoglobin (SpO2), and body temperature in
normal and axillary modes of neonatal, pediatric and adult
patients.
The most likely locations for patients to be monitored are general
med/surg. floors, general hospital and alternate care environments.
This device is available for sale only upon the order of a
physician or licensed health care professional.
► Cleaning
Wipe the monitor with a cloth slightly dampened with warm water and
a mild detergent or appropriately diluted, nonstaining disinfectant
solution.
Wipe the NIBP hose and any reusable cuffs with a damp cloth
moistened in a mild detergent solution.
Wipe the temperature probe with a cloth dampened with alcohol, warm
water, or an appropriately diluted, nonstaining disinfectant
solution.
Clean the SpO 2 sensor with a cloth dampened with 70% alcohol or
bleach diluted to one part in ten.
► Storage
For maximum monitor life and optimum performance, store the monitor
at room temperature in a dry environment.
For prolonged storage, keep the monitor in the original container
or in some other dust-proof container.
Before storing the monitor, verify that the printer contains paper.
► Environmental Specifications
| Operating Temperature | +10 °C to +40 °C
+50 °F to +104 °F |
| Operating altitude | -170 m to +4877 m
-557 ft to + 16,000 ft |
| Shipping altitude | -615 m to 12,300 m
-2000 ft to 40,000 ft |
| Storage temperature | -20 °C to +50 °C
-4 °F to +122 °F |
| Relative humidity | 15% to 90% (non-condensing) |
► Safety Considerations
Always consider the following safety points when using the monitor:
• Place the monitor and accessories in locations where they cannot
harm the patient should they fall from a shelf or mount.
• Do not connect more than one patient to a monitor.
• Do not connect more than one monitor to a patient.
• Do not use the monitor in an MRI suite or hyperbaric chamber.
• Do not autoclave the monitor.
• Accessories can be autoclaved only if the manufacturer’s
instructions clearly approve it. Many accessories can be severely
damaged by autoclaving.
• Inspect the power adapter cord periodically for fraying or other
damage. Replace the adapter as needed. Do not operate the monitor
from mains power if the adapter, the adapter cord, or the cord plug
are damaged.
• Frequently check all cables, both electrically and visually.
• To avoid explosion, do not operate the monitor in the presence of
flammable anesthetics.
► Terms & Conditions
Before placing orders, there are some important issues that need to
be paid attention to. For the purpose of promoting the business,
please read the following items with patience and carefully.
Firstly, please be sure to keep in mind to look over all the
pictures patiently before purchasing to ensure the product you’re
browsing is exactly what you want to buy. It is of vital importance
to do so because pictures are also significant references of the
product description. Secondly, the buyer is responsible for all the
customs fees including all taxes and duties. Therefore, you have to
make sure the machine you are ordering can be imported into your
country. In a word, don’t forget to check out all related
information when placing your orders.
Thank you for your time! If you are interested in Welch Allyn Vital Signs Monitor 300 Series 53NTP Plastic Cover, please let us know. Welcome to place your orders.
Thank you for your time and interest.
