Static Laboratory Clean Room Pass Box With UV Light Stainless Steel 304 Cabinet

Stainless Steel 304 Cabinet Static Laboratory Clean Room Pass Box With UV Light

Instructions:

Pass box managed according to the cleanliness level of the higher-level clean area connected to it. For example, the pass boxconnected between the spray booth and the filling room should be managed according to the requirements of the filling room. After work, the operator in the clean area is responsible for wiping the internal surfaces of the pass box and turning on the UV sterilization lamp for 30 minutes.

1. Material entering and leaving the clean area must be strictly separated from the flow channel and accessed by the material-specific channel of the production workshop.

2. When the material enters, the original auxiliary materials are unpacked or cleaned by the person in charge of the preparation process, and then sent to the temporary storage room of the workshop through the pass box; after the outer packaging is removed from the external storage, the inner packaging material is The pass boxis sent to the inner bag. The workshop integrator handles the material handover with the person in charge of the preparation and internal packaging process.

3. When passing through the pass box, the rules for "opening and closing" of the inner and outer doors of the pass boxmust be strictly enforced, and the two doors cannot be opened at the same time. After opening the outer door, put the material into the door, then close the door, then open the inner door to take out the material, close the door, and so on.

4. When the materials in the clean area are delivered, the materials should be transported to the relevant material intermediate station and removed from the clean area according to the reverse procedure when the materials enter.

5. All semi-finished products are shipped from the clean area and are sent from the pass boxto the external temporary storage room and transported to the outer packaging room via the logistics channel.

6. Materials and wastes that are highly susceptible to pollution should be transported from their dedicated transfer windows to non-clean areas.

7. After the material enters and exits, the site and the window of the intermediate station and the pass boxshould be cleaned in time, and the inner and outer access doors of the pass boxshould be closed to clean and disinfect.

Technical Parameters:

Keling Purification Technology Co., Ltd engaged in air purification field for many years, that is  

Professional manufactory with research and development, produce, sales of air purification equipment and HVAC air filter.

our product concern the follow range:

1: Clean room equipment: clean room Air shower, Pass box,Duct HEPA filter box  Dynamical pass thru, Laminar flow bench, fan filter unit, DOP air HEPA unit, Dispensing booth, sampling booth, laminar flow booth , soft wall clean room , air cleaner , laminar flow ceiling unit. Laminar flow wardrobe .

2: HVAC air filter: ULPA air filter, Mini-pleats HEPA filter, HEPA filter with clapboard filter, high

temperature-resistance filter, pocket air filter, V-cell air filter, pre-filter, active carbon air filter,

v-bank air filter with big air volume, bag air filter, panel air filter, z-line air filter and Grease filter.

3: Hard wall clean room project, such as design, construct and monitor service and raw material supply.   

Our product service for biological, food, chemical, medicine, electronic, micro-electronics,

skin care, precise instrument industry and Aero-Space, laboratory, scientific, national defense area

and so on , Our product have good reputation in worldwide ,our client spread all over European

and  Southeast Asia.

We have excellent technical team pursue the high quality to exist, insisted concept of credit for in   sustainable development

We sincerely hope establish steady and friendly business relationship with you.

You will achieve what are you want! 

Trust me! I will be your finally choose !