500KW Pelton Turbine Generator 400V To 10500V For River Power

Pelton Turbine Generator/River Turbine Generator/Pelton Wheel Water Turbines

1.product Introduction

A Pelton turbine is a hydraulic prime mover whose outflow centerline is tangent to the pitch circle of the runner, and whose blades consist of a series of double bowl-shaped water buckets. According to the layout of the main shaft, the main shaft is divided into two parts, the horizontal shaft and the vertical shaft, no matter which kind of runner is always located in the atmosphere.
This turbine is suitable for high head, low flow hydropower stations. The application head of large bucket turbine is about 300-1700 meters, and the small one can reach 40-250 meters. At present, all power stations with a water head exceeding 1000 meters in the world use bucket turbines, and the power of a single unit can reach more than 400MW.
A Purton turbine is a hydraulic prime mover that works according to the law of momentum. However, we have been using the basic theory of anti-turbo research for many years, and even many concepts, norms and even industry habits are derived from anti-turbo. This has greatly hindered the technological progress and development of pelton hydro generator turbine.

2.Application

3.More about us

This belongs to customized products. We could design products according to your requirement. All of our products are strictly designed and manufactured under ISO9001 quality management system and TUV, BV.

Please can you send me below parameters, so our engineers could support your project?
Where is the plant? How many kw each unit? How many units?
1. Design head: ___m
2. Design flow: ___m³/s
3. Frequency: 50Hz or 60Hz
4. M.a.s.l: ___m
5. Power factor COSφ:
6. Generator output voltage: __V
7. On-grid or Off-grid type? (On-grid type voltage: ____Kv)
8. Basic situation about the project and your company introduction.
Send enquiry to the supplier

德阳东森水电设备有限公司成立于2007年,公司专业研发,生产和销售水电站水轮发电机组及其辅助设备等.公司可提供各型机组设计,制造,设备成套,安装调试以及从事水电站投资等综合性服务.产品有混流,轴流,贯流,冲击,斜击式五大类,可生产单机容量100~50000kW 各型水轮发电机组.

公司测试技术先进,手段齐全,能进行各种实验检测.公司建立了完善的质量保证体系,通过了ISO9001:2008质量管理体系认证.
    公司地处中国重工业三大制造基地之一的德阳市,三大主机设备制造厂和超强的设计资源为我公司提供了优质的加工和服务保障.公司位于经开区小企业创业园基地,有独立厂房,办公区和生活区,现有员工100余人,工程技术人员26人,有专业水轮发电机组设计人员12人,拥有专业水轮发电机组安装人员30多人.公司采取自行设计,部分加工协作,自行总装,安装方式,年产值5000多万元,多年来已为国内外700余座电站提供了发电设备,深受用户好评.