High Performance Wheel Brushes Knotted Shank Mounted 100mm OD for
Derusting
This 100mm twist knot wire wheel is mounted on a 6mm shank. The wire strands are twisted together allowing more force to be
applied to the tool while also achieving longer tool life. Ideal
for use in a cordless drill
Details Product Description
Aggressive brush for cleaning, derusting and work on weld seams.
Steel wire is the most common filament material.
Brushes with steel wire as the filament material are especially
well-suited to work on surfaces and deburring.
Our factory special wire has high tensile strength and bending
fatigue strength.
This ensures that the wire wears down in the optimal way, as well
as a long tool life, even in extreme brushing applications.
Steel wire withstands temperatures up to 300 °C.
- Suited for one hand angle grinders, large angle grinders and
pneumatic grinders
- Removable retaining skirt for improved performance
- Information disc on brush
- Ensure correct maximum operating speed matches grinder
Applications
- Suitable for heavy duty cleaning of metal, removal of weld splatter
and paint, and surface preparation
Item name
| Wheel Brushes Knotted Shank Mounted |
Outer diameter
| 100MM |
Shank size
| 6mm |
Wire Material
| Spring Steel wire |
Wire Dia.
| 0.5mm |
Shank length
| 30mm |
Max RPM
| 4500 |
Knots No.
| 18 piece |
Advantages
Aggressive brushing effect due to the very stiff wire knots.
Optimal access to hard-to-reach areas such as grooves and recesses.
Long tool life through use of special wire.
Recommendations for use
Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 500
watts.
Safety notes
When clamping the brush, ensure that the shank is clamped as far
into the arbor as possible.
This applies in particular for use in the high rotational speed
range. The minimum clamping length is 10 mm.
Materials that can be worked
Cast iron
Steel, cast steel
Applications
Cleaning
Deburring
Derusting
Descaling
Paint stripping
Removing oxide layers
Root seam processing
Work on fillet welds
Work on weld seams
