508 Flat Die Grass Cassava Pellet Mill Machine 3t/h Cassava Pellet
Making Machine
Biomass Pellet Mill is the machine than can process biomass waste
such as grass ,cassava , wood waste such as sawdust , bamboo ,wood
shaving into fuel pellet machine . Among of them, grass and cassava
pellet is the feed pellet for cattle ,sheep etc .
The type is the ring die biomass pellet mill machine :
| 1 | Model | DRZL508 |
| 2 | Machine size | 3150*1250*1920MM |
| 3 | Total weight | 3200KGS |
| 4 | Output | 1.5-3.5T/H |
| 5 | Ring die size | Inner diameter :508mm |
| 6 | Asistance Power | 2.2kw+0.75kw |
| 7 | Main power | 132/110kw ,8/6p |
| 8 | Bearing | Body inside :FAG OR SKF |
| 9 | Pellet size | φ6mm-φ12mm |
| 10 | Roller Qty | 2 pcs |
| 11 | Cooling method | Oil cooling ,real 24 hours running . |
| 12 | Pellet molding rate | >=95% |
| 13 | Oil seal | Taiwan original oil seal |
| 14 | Pellet Length | Adjustable by cutter |
| Including :One Ring Die ,two roller shell . |
Highlight :
1. Water content can arrange from 10-20%.
2. No dust go into side of machine . If dust inside ,will change
gear with much time and labor .
3. Easy maintenance . Less time to change pellet die and roller
shell .
4. Pattent pellet mill .
Remarks
◆ The above capacity comes from 8mm pellets production.
◆ The final capacity of Cassava pellet mil machine depends on the features of raw materials,
operation and maintenance,etc.
◆ There are 2 rollers in the pressing chamber.
Structure of 508 Ring Die Grass Cassava Pellet Mill Machine 3t/h Cassava Pellet
Making Machine
- 1. Frequncy control feeder screw with anti-caking device .
- 2. Imported gear box ,high processing accuracy .
- 3. Imported gear processing equipment to ensure long time use .
- 4. Safety Assembly- protecting the main shaft ,motor and ring die .
- 5. Modulating alloy steel of main shaft with good bending
resistance and torsional performance .
- 6. Scraper panel assembly, with hard alloy knife to ensure the
pellet surface quality .
(Compression Ratio= L/D L: Effective Die Hole Pelleting Length; D:
Effective Die Hole Dia)
Generally speaking, the higher the compression ratio, the denser
the finished pellets. But it does not mean that the higher the
compression ratio, the better the pellet quality. Compression ratio
should be calculated based on your raw material for making pellets.
Commonly compression ratio is inversely proportion to the hardness
of raw material, the harder the raw material, the smaller the
compression ratio.
How to work of 508 Ring Die Grass Cassava Pellet Mill Machine 3t/h Cassava Pellet
Making Machine
The cassave in the granulation bin is fed into the chute by the
feeding auger, the material enters the wood press chamber through
the forced feeder, and is fed into the two pressing areas in the
ring die by the feeding scraper. Due to the high-speed rotation of
the ring die The material is brought between the ring die and the
pressure roller. Under the strong extrusion action of the ring die
and the pressure roller, the material is gradually compacted and
formed in the die hole. Because the extrusion of the material
between the die rollers is continuous , so the formed material is
continuously discharged from the die hole in a columnar shape, and
then cut into particles of the required length by the cutter, and
then enters the next process.
The Spare parts
1. Ring die :Pellet dies must resist abrasion, corrosion from chemical
exposure and breakage caused by the physical stresses of pellet
formation. The optimum die combines high resistance to abrasion,
breakage and corrosion with maximum productivity. Our expertise
enables us to precisely match the die specification to your
required formulation, even if it means customizing a die pattern to
meet your exact needs.
2. Roller shell :
Each die and roller assembly stay together as a unit, extending die
and roller life and enabling easy storage and conversion.
Raw material :alloy steel .
Others such as five piece cover ,o ring ,main shaft etc .
Contact us to get price .
