FTTH ONU Device PON EPON ONU OLT 2 PORT 1 GE+1 FE EPON 1.25Gbps
Products Features:
xPON adaptive GPON and EPON mode supported
Protocol: GPON- G.984/ G.983 code ; EPON- 802.3-2005/CTC support
G.711, G.722, G.729 and T.38 coding and encoding protocol
support VoIP, wifi bgn or CATV(see detailed model function)
support L2/L3 multicast forwardingL2 bridge forwarding,L3 router
forwarding,NAT/NAPT
support flexible traffic classification;
support HQoS (Hiberarchy Quality of Service)
Data Process:
Support two-way linear speed data forwarding, support 256 MAC
Address Table
Support 802.3 SNAP and Ethernet II package, supporting 802.1P/Q
priority definition, IP DSCP field, ACL definition based priority
Support tag identification,modify and add; support protocol message
identify and capture
Supports ACL rule(supporting MAC/IP/TCP/UDP/ICMP /IGMP /IPv6 format
)
Ethernet support adaptive or manual rate and full/half duplex
Support 802.1x certificate, STP /RSTP protocol
Traffic control based on ingress ; support QoS function
DataSheet:
| Connector type | SC/PC |
| PON No. | 1 |
| Fiber mode | Single fiber |
| Wavelength | Transmitting port:1310 +/-20nm, Receiving port:1490 +/-10nm |
| Portocol | GPON: ITU-T G.984.1/2/3/4; EPON: 802.3-2005 and CTC EPON |
| Speed | GPON: download 2.488Gbit/s, upload 1.244Gbit/s; |
| EPON: symmetric 1Gbit/s |
| Output optical power | Min. 0dBm; max. +4dBm |
| Receiver sensitivity | Better than -27dBm |
| Receiver optical power | Min. -3dBm |
| Damaged threshold value | 7dBm |
| Optical link length | Max. 20km |
| CATV optical receiver index and parameters |
| Optical part |
| Optical wavelegth | 1200~1650nm |
| Receiving optical power | 0 |
| Reflection loss | ≥50dB |
| Optical connector | FC/APC |
| Fiber mode | Single fiber or Double fiber |
| Isolation (WDM) | Forward path≥40dB,Reflection path≥22dB |
