Antibacterial Carbon Filter Respirator Mask With Easy Breathing /
Speaking
FFP2 masks are designed to offer protection against nuisance
airborne particles which can be deleterious to health! To assist
with the health benefits, the masks are manufactured with comfort
in mind, to encourage workers in potentially harmful environments
to wear them for longer. Therefore, careful selection of the
correct mask means that workers can wear them with ease, securing
their protection whenever they are exposed to risk. This helps to
safeguard the welfare of workers, while also ensuring that
workplaces remain compliant.
Points for Attention:
- This product is prohibited to be used with damaged package;
- Do not use in atmospheres containing less than 19.5% oxygen, as
this mask does not supply oxygen; Not for use in oil mist
atmospheres;
- If the product becomes damaged, soiled, or breathing becomes
difficult, leave the contaminated area immediately and replace the
product;
- This product is one-time use only and can not be washed;
- This product should be stored in a clean, dry and ventilated
environment with relative humidity less than 80% and without
harmful gas.
Certification
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
Descriptions
The mask of FFP1V Dust Mask is light and comfortable. The internal
nosepiece is made of velvet/sponge double-layer. There are no
exposed metal components; the external nosepiece used to adjust the
mask on the face is metal coated. Structure and materials are long
lasting and avoid the collapse in humid environments.
Material of each layer
1st layer : Protective pp spun-bonded non-woven
2nd layer : Active carbon filter(MX-3006)
3rd layde : FFP1 melt blown filter(have filter efficiency level of
80%)
4th layer : Shaped needle punched cotton
FAQ
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to
prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production
samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face
mask, OEM production is ok.
