2020 hot sale wall mount 1000ml touchless alcohol gel dispenser sensor hand sanitizer machine automatic soap dispenser
1. Fashion and nice appearance.
2. Advanced vacuum suction technology to avoid leakage.
3. Simple structure, very convenient to assemble and disassemble.
4. With ABS material, Solid, Durable.
5. Variety of detergents: Liquid soap, shampoo, Lotion, etc
6. Available for star hotels, hospitals, office buildings and other places.
Product Details:
| Model no.: | 882 |
| Material: | ABS Plastic |
| Capacity: | 400 ml (max 500 ml) |
| Function(optional): | Drop, Spray |
| Sensor distance: | 6-12 cm |
| Droplet(adjustable): | 0.6~0.8ml / 0.8~1.0ml / 1.0~1.2 ml |
| Unit size: | 11.5 * 9.5 * 21.4 cm |
| Unit weight: | 0.56 kg |
| Power: | 4 pcs “AA” batteries |
| Battery life: | At least 100,000 Dispensing Cycles(DC) |
Features:
1. Smart intelligent electronics skill being adopted ensure sits high performance. No contact, to effectively prevent cross-infection of bacteria, prevent human damage & waste.
2. Because of advanced pump fit to all kinds of liquid can be applicable, like shampoo, liquid soap, sanitizer, etc.
3. Power consumption is very low, battery life reaches more than 100,000 cycles.
4. Flashing LED indicates low battery.
5. There is a device for protect from stealing off.
6. Primary application: school, commercial center, health care, institutions, hospitals, office, hotel, food factory & etc.
Additional information:
Capacity: 500 ML, 400 ML
Dispenser: Alcohol Spray Dispenser, Disinfectant Dispenser, Gel Dispenser, Lotion Dispenser
Dispenser Type: Touch-Free Dispenser
Installation Type: Wall Mount Dispenser
Main Material: ABS Plastic
Installation:
Do not install in areas or direct sunlight, make sure there are not white surface or any other strong reflectors within 30cm below. Mount the dispenser to the wall by using the enclosed screws and wall plugs. Make sure the wall surface is cleaned and in good condition to ensure proper mating of the dispenser to the wall. Install six (6) Alkaline “C” Cell batteries, 1.5V into the battery chamber which is located on the back of control box, replace the control box by sliding down. Must be flush to bottom.
