Spo2 Sensor Non Oximax Type DB9 7Pin In 1M Blue Cable
Product Description
Compatible monitor model No. : N-10, N-100, N-180, N-190, N-20,
N-200, N-30,
N-3000, N-390, N-395, N-6000, NPB-190, NPB-195, NPB-290, NPB-295,
NPB-3910, NPB-3920, NPB-3930, NPB-3940, NPB-40, NPB-4000, NPB-75,
Symphony N-3000
Connector : DB9 7PIN
Main Features
| 1. Use International Imported chip, with good transmission effect. |
| 2. Use international standard cable, with strong anti-interference. |
| 3. Latex Free. |
| 4. Normally 3m TPU cable, customized length is available |
| 5. One year warranty. |
| 6. Finger clip, Soft tip, Wrap, Multi-Y, Ear clip types available. |
| 7. Easy to clean and repair . |
Our Advantages
1. More competitive price.
2. 1 pcs samples available.
3. OEM & ODM service acceptable.
4. With a wide range of products, complete models, reasonable prices and high quality.
5. High quality after-sales service.
Main technical parameters
| LED | LED | 660nm normal |
| Infrared | 905nm normal |
| Text Range | Oxygen Saturation(%SpO2) | 0% to 100% |
| Pulse Rate(bpm) | 30 to 245 |
| Accuracy | SpO2 | ±1%(90~100%) |
| ±2%(80~90%) |
| ±3%(below 70%) |
| Pulse Rate | 2bpm(30-250bpm) |
| Storage Environment | -10℃~+40℃ |
| Operating Temperature | ±5℃~+40℃ |
| Operating/Storage/Transportation Humidity | 0%-80% |
| Hyperbaric Pressure | 86kPa-106kPa |
Instruction
1. Hold the sensor with its opening towards the patient's index finger, toes, palm or sole.
The side with a finger or toes sign is placed on the top, detail is
as follows:
2. Put the patient's measurement part into the sensor until the tip against at the end
of the sensor.
3. Adjust the measurement part to be placed evenly on the middle
base of the sensor.
4. Direct the cable along the top of the patient's hand or foot.
5. Plug the sensor into the proper oximeter and verify operation as
described in the oximeter operator's manual.
6. Inspect the sensor site every 2 hours for skin integrity.
Product ranges
Medical and custom cables and connectors, medical accessories,
ECG/EKG/EEG/EMG cables
and lead-wires, SpO2 sensors and cables, Medical temperature probes
and cables, IBP cables,
NIBP hoses and connectors, Silicone rubber electrodes,
Electrosurgical mono-polar and bi-polar
cables, TENS/EMS lead wires, communication cables, measuring
cables, wire harnesses and so on.
