0.98m height face recognition turnstile waterproof outdoor use
Function Introduction
It has stable and reliable mechanical locking device, precise
movement and turntable combination structure with special process;
With two-way traffic function, the steering lever is divided into
two directions and one direction;
It has the function of power-off and off-bar. In case of emergency,
the gate will automatically drop the pole, and pedestrians can pass
quickly to meet the fire-fighting channel requirements;
After the pedestrian reads the valid card, if the system does not
pass within the specified time of the system, the system will
automatically cancel the pedestrian access right;
An external two-way arrow indicator can be connected to indicate
the traffic status, and the traffic can be passed or prohibited.
An external bidirectional flow counter can be connected to display
the number of people in the traffic direction;
The control panel has a dial switch, which can adjust the transit
delay time by algorithm, and can also be adjusted into a memory
mode. For example, brush five effective cards and pass five people;
The anti-reverse device function prevents the rotating unit from
rotating opposite to the original direction;
Unified standard external electrical interface, can be connected
with a variety of card readers, and can be remotely controlled and
managed through a management computer;
The entire system runs smoothly with low noise
Product Information
Rainproof housing, 304 or 316 stainless steel.
Mechanical drive unit with solenoid locking mechanism eliminate the
use of expensive electric motor and reduce maintenance cost.
If arm rotated more than half, it will auto-rotate to the next idle
position. If arm rotated less than half, it will auto-rotate back
to the current idle position.
Built in adjustable tensioner to control rotation force to minimize
over rotation. Arm just need to be pushed lightly to rotate
therefore even elderly or children are able to use the turnstile.
Turnstile can be configured to be bi-directional or
uni-directional. Housing is locked with special key to avoid
tampering.
Innovative and unique mounting surface ensures simple and
convenient installation for system integrator.
Can be used with variety of access control devices: IC / ID card
readers, bar-code scanner, fingerprints, etc. (Access controller
needed)
Automatic reset function. Should the user fail to pass within the
prescribed time (default time is 5 seconds), the system will cancel
the authority of the current user automatically.
The mechanism is equipped with an automatic regulated hydraulic
buffer device. There is no noise and impact when running.
| Technical parameter |
|---|
| Product number | CW407 |
| Voltage | AC220V±10%, 50HZ±10% HZ |
| Working temperature | -25℃-70℃ |
| Relative humidity | 5%--80% |
| Rated power | 20W |
| Input control signal | Switch quantity (standard configuration does not include RS232,
485) |
| Running speed | 30~40 people/minute |
| Infrared beam | 4 pairs |
| Number of trouble-free runs | 2 million times |
| Average life span | 3 million times |
| Channel width | 500~910mm |
| Swing arm material | 10*560*497.5 Acrylic |
| Product Size | 1400*180*990mm(single movement) |
| 1400*286*990mm(dual movement) |
| Channel frame | 1.0~1.3 thick 304 stainless steel |
| Package weight | About 55 KG (single side road) |
