48 Core Wall Mounted FC ST ROSH Optical Junction Box
Wall mounted Patch Panel Fiber Optic terminal box GPZ-48A,12core,24core,48core
Application:
The product can be used on the terminal of the optical cables,
different types and structures, the diameter of which are within
18mm tray.
Structural features:
1. All property indexes are in accordance with National
YD/T814-1996 Standard.
2. The body make use of cold rolling steel sheet, and the surface
use the technique of dim blowing plastic. Strong adhesive force,
artistic and durable.
3. Distinctive design of 1～2 cable entrance and fiber exit of
1～48cores assures flexibility.
4. Cable entrance and fiber exit are sealed with oil resistance NBR
to increase the flexibility. Users can choose to prick the entrance
and exit.
5. Overlapping fiber-melting tray and separate insulation earth
unit make the disposition of the cores, expanding the capacity and
cable-earthen flexible, convenient and safe.
Main technical Specifications
1. External Size: (length×width×height) 330×183×70/100
2. Weight:1.7/2kg
3. optical fiber winding radius: ≥40mm
4. extra loss of fiber tray:none
5. fiber length left in tray:≥1.6m
6. fiber capacity: 48 cores
7. working temperature: - 400C ~ + 600C
8. lateral pressure-resistance: 500N
9. shock-resistance:750N
Operations
1. Peel the cable , take off the outer and inner housing, as well
as loose contract tube, and wash off the filling grease, leaving
1.1～1.6m fiber and 20～40mm steel core.
2. Fix the cable-pressing card and the cable, as well as the cable
reinforce steel core.
3. Lead the fiber into the melting and connecting tray, fix heat
contract tube and melted tube to one of the connecting fiber. After
melting and connecting the fiber, move heat contract tube and
melted tube and fix the stainless (or quartz) reinforce core stick
,make sure the connecting point is in the middle of the housing
pipe. Heat the pipe to make the two into one.Put the protected
joint into the fiber-laying tray.(one tray can lay 12 cores)
4. Lay the left fiber in the melting and connecting tray evenly,
and fix the winding fiber with nylon ties. Use the trays from the
bottom up. After all the fiber has been connected, cover the top
layer and fix it.
5. Position it and use the earth wire in accordance with the
project plan.
6. Close the cover. It can be installed on the wall or in
horizontal line.
| Packing List |
| Terminal case main body | 1PCS |
| Polishing sand cloth | 1PCS |
| Melting and connecting mark | 1PCS |
| Fiber housing | 2-48 PCS |
| Tie | 4-16 PCS |
