HBY 90X105.5X5.9mm Rod Buffer Seal PU POM Arm Cylinder Seal Kit
HBY-90, 90X105.5X6,90X105.5X5.9 Excavator Cylinder Rod Buffer Seal
PU+POM Color Purple ZAX160LC-3 Arm Cylinder Seal
HBY is a kind of Rod seal,it is used as absorbing impact and surge
pressure under heavy laod, in order to seperate high tempareture
fluids and improve the service life of these element.
Scope of use
Hardware and plastics, water supply and drainage, HVAC, fire
fighting, pharmaceuticals, ships, and other pipeline systems,
automobiles, motorcycles, various machinery, household appliances,
electronics, toys, sports equipment, pneumatic components and
sanitary ware, etc.
| HITACHI: | UH04-5 UH07-7O/N UH09 UH09-7 EX60-1/2/3/5/6 EX90-1 EX100-1 EX100-2
EX100-3 EX100-5 EX120-1 EX120-2 EX120-3 EX120-5 EX120-6 EX160-1
EX200-1 EX200-2 EX200-3 EX200-5 EX200-6 EX210-5 EX220-1 EX220-3
EX220-5 EX220-6 EX270 EX300-1 EX300-3 EX300-5 EX300-6 EX330-3
EX400-1/2/3/5/6 EX450-1/2/3/5/6 ZAX55 ZAX60 ZAX70 ZAX100-1 ZAX100-2
ZAX135 ZAX200-1/6 ZAX210 ZAX225 ZAX230 ZAX230-5 ZAX240 ZAX250-8
ZAX270 ZAX330 ZAX350-3 ZAX360 ZAX360-3-N ZAX360-O ZAX450 |
|
|
|
| KOBELCO: | SK07-N2 SK55 SK60-1 SK60-2 SK60-3 SK60-5 SK60-6 SK100-1 SK100-2
SK100-3 SK100-5 SK100-6 SK120-1 SK120-2 SK120-3 SK120-5 SK120-6
SK135-7 SK200-1 SK200-2 SK200-3 SK200-5 SK200-6 SK200-6E SK200-7
SK200-8 SK210-6E SK210-7 SK210-8 SK230-6 SK230-6E SK220-3 SK220-6
SK235 SK250-8 SK300-3 SK300-6 SK310-3 SK320-3 SK320-6E SK320-6
SK330-8 SK350 SK350-6 SK350-8 SK400-3 SK09 SK450 |
|
|
|
| SUMITOMO: | SH60 SH75 SH100 SH120-1/2/3/5 SH160 SH200-1/A3 SH210 SH220 SH220A3
SH260 SH300-2 SH350 LS2650FJ-2 LS2800CJ/DJ/EJ/FJ-2 LS2800FJ2
LS2800F2 LS3400EA LS3400FJ LS4300 |
|
|
| KATO: | HD250SE-2 HD250-5/7 HD307 HD400SE-2 HD400SEN2 HD400-5/7 HD450-5/7
HD510 HD512 HD550-5/7 HD700-2/5 HD700-7 HD770-1 HD770-2 HD800-5
HD800-7 HD820-1/2/3 HD900-5/7 HD1023 HD1220SE-2 HD1250-5/7 HD1430
HD1880-7 HD900-7 HD880 |
|
|
|
| VOLVO: | EC210B EC240B EC290B EC320C EC360B EC460B |
|
| DAEWOO: | DH S55 DH55-5 DH60-7 DH80-7 DH130-5 DH150-7 DH220-2 DH220-3 DH220-5
DH225-7 DH258-7 DH280-3 DH320 DH320-2/3 DH330-3 DH330CL-5 DH450
DH130-7 DH280 |
|
|
|
| HYUNDAI: | R60-7 R130-5 R130-7 R200 R200-5 R210-3 R210-5 R210-7 R215-7 R220-5
R220-7 R225-7 R260-5 R280-1-N/O R290-1 R290-3 R290-7 R300-5 R300-7
R305-7 R320 R320-3 R320-7 R335LC-7 R420 R450-3 R450-5 |
|
|
|
Advantages of editing Voice
1. The sealing ring should have good sealing performance within the
working pressure and a certain temperature range, and can
automatically improve the sealing performance as the pressure
increases.
2. The friction between the sealing ring device and the moving
parts should be small, and the friction coefficient should be
stable.
3. The sealing ring has strong corrosion resistance, not easy to
age, long working life, good wear resistance, and can automatically
compensate to a certain extent after wear.
4. Simple structure, convenient use and maintenance, so that the
sealing ring has a longer life.
- Material: NYLON+PU
- Working Pressure: ≤21MPa
- Temperature: -45~ 110℃
- Speed: ≤0.5M/S
Storage notice:
- Do not open the seal package if unnecessary, otherwise the dust
will stick to the seal or scratch it.
- Store in cool place, not on sunlight place. UV and moisture will
accelerate the deterioration of rubber and plastics and dimensional
changes
- Carefully pack, store unpackaged product, do not glue or put into
impurities, keep the original state. Keep the Nylon seal package
close to prevent moisture cause dimensional changes
- Do not put seals near heat sources, such as boilers, stoves.
Otherwise heat will accelerate the aging of seals
- Do not put seals near the motor and other place where produces
ozone
- Do not use a needle, wire, rope hang seals, otherwise, would cause
the seal deformation, damage the lip
- Sometimes, there are color change or white powder on the seal
surface (frost phenomenon), this will not affect the performance of
the seal
Packaging & Shipping
Packed with carton, fastened with plastic band.
Shipping methods:
- By courier
- By air
- By sea
- By truck to your designated place
Our Services
OEM is welcome
Accept customized products order
Plenty of stock and sufficient production capacity fully guarantee
on time delivery
Company Information
We are the sales office of Xiamen TYS seals in Guangzhou.
Xiamen TYS Seals Technology Co.,Ltd. was established in 2001, the
company is located in Xiamen, Fujian, China, It was registered as a
hydraulic sealing system enterprises which was approved by the
related national departments. The company combined with R&D,
production and sales wholly, meanwhile,we have been one of the
perfect cooperated partners of the America MPI Co.,Ltd which is an
iternationally renowned seal company. we have established our own
specific brand named TYS,MPI. The company has passed ISO9001: 2000
certification and is a member of Fujian Hydraulic Association and
Guangzhou Construction Machinery Parts Association as well. The
company has complete production line and testing equipment, including CNC
process center, CNC digital controlled lathes, large hydraulic
machine, the computer fully-controlled sintering furnace,
vulcanizing machine, precision injection molding machine, CNC
digital controlled lathes without molding and so on. We are
specialized in manufacturing a full range of hydraulic seal
products, including the PTFE goods which is adapt to harsh working
conditions, durable TPU and Rubber seals,Its specification covers
the standard of GB / T 15242.1-94, GB / T 1524.2-94, ISO 7425 / 1,
ISO 3320, which can completely match the groove sizes of household
and overseas famous super enterprises.With excellent quality,
firt-class service, honest business, our company flourishes
quickly, Up to now,we have owned 30 branch offices nationwide, the
products have been exported to Europe, America, Africa, Southeast
Asia and other countries. We are expecting to develop long -term
relationship with your esteemed company. Let us join hands together
and prosper jointly.
We attend the exhibitions domestic and abroad
