Automatic Waste Tyre Strip Block Cutting Machine For Tyres Chip
First Introduction
Application:
To cut tire from tire cutter into 50*50mm pieces.
Main technical spc.:
| 1.Type | QK-600 |
| 2.Rotation speed of blade disk | 450r/min |
3. Moving blade number Fixed blade number | 2pcs 1pc |
| 4.Motor power | 39KW |
| 5.Production capacity | 20-30pcs/h |
| 6. Overall size | 2100*1800*2400mm |
| 7.Weight | around 4800kgs |
Features:
1.Turn on the power, first start the main motor, wait for the motor
to run normally, prepare to feed.
2.The radius of the tire cut through the tire dismantling machine
is placed on the rotating pallet by an operator,the tray is
controlled by the worker and the button controls the hydraulic
cylinder lift,The cutter will feed automatically and cut to 35mm block. cyclic cutting operation until the ring,after cutting to the mouth ring, the button is returned to the
hydraulic cylinder to take down the ring and continue to be placed
in the radius tire cut by the tire dismantling machine.
Attention:
1. Before starting the machine, check if the tool, gear, and bolt
are loose and wear out. after confirming there is no problem, close
the cover.
2. The width of the block is kept 50mm-90mm.
3. Regularly add lubricant and change.
4.Note that the tool should be repaired in time if it is damaged
after use for a period of time to avoid danger.
