FREESEA Solar Water Pump Deep Submersible Water Pump with MPPT
Controller DC 24V Submersible
About this item
Pump, Deep Well Submersible Pump, 1Hp, 220V 60Hz, 30 Gpm, Stainless
Steel, For 4" Or Bigger Well, Long Life
2 Wire Pump With Built In Control Box- Does Not Require External
Control Box; Industrial Grade Heavy Duty, Good For Home Usage;
Built In Thermal Protection
Country Of Origin : China
Submersible Pump
Why Choose Us
【LATEST MPPT CONTROLLER】The solar water pump controller drives the
high efficient brush-less DC pump motor, utilizing the latest
Maximum Power Point Tracking (MPPT) technology to ensure maximum
flow is delivered under all light conditions. It also protects the
submersible pump from frequent start up in low light conditions,
overheating and running dry.
【MAIN PARAMETERS】Voltage: 24V, Input Power: 140W, Max Head: 164ft,
Max Flow: 6 GPM, Bearing: NSK, Height: 19'', Outlet: 3/4'',
Diameter: 3'', Motor: Brushless DC Pump Motor, Materials: Solar
submersible pump for irrigation body: Stainless steel, Impeller of
solar submersible pump for irrigation: Stainless steel, Package
size: 19'' x 14'' x 6.5'', Shipping weight: 19lbs.
【INTELLIGENT SENSOR】Low water level sensors and tank full sensors
are included so the pumping system can be fully automated. With
sensors installed, the pump will switch off if the header tank is
full or if the water source has fallen below the pump intake.
Automatic restart when water returns to the well or when the motor
temperature returns to the safety range. Easy installation,
maintenance-free, safe and reliable.
【CONTROLLER PROTECTION】Electronic monitoring gives the controller
the capability to monitor the system and automatically shut down in
the event of: Dry well conditions with low level switch, Bound pump
with auto-reversing torque, High voltage surge, Low input voltage,
Open motor circuit, Short circuit, Over heat. Widely used for
Irrigation/Automatic water sprinkler system, Garden fountains,
Livestock/Living water supply, Water treatment systems, Large scale
watering system for commercial.
Description
3.8" deep well submersible pump, fits in 4" or bigger well casing.
Built in starter box- Does not require external control (starter)
box.
2 wire pump with 3-wires (2 wires + ground wire).
High quality UL approved motor for long life
Built in 1 HP capacitor start, and thermal protection switch.
This pump has a built in check valve.
1-1/4” NPT discharge (can go with any pipe size)
High efficiency, hermetically sealed motor is thermally protected
to prevent overheating, and uses less energy.
