Single Tank 330L Ultrasonic Cleaning Machine 3600W 40KHz For Window
Blind
1. Why You Should Use Whale Cleen Sonic Ultrasonic Cleaner For
Window Blind Cleaning?
1). It saves your time and labor in this heavy duty cleaning job.
You just need to put your blind in the machine and set the time.
You can do other job before this is done, no operator is needed to
present during the working process.
2). It can clean more blind hole than your hands. Because
ultrasonic cleaner is working under micro type cavitation so it can
reach the blind spot which can not clean by your hands.
3). Whale Cleen ultrasonic cleaner is environmental cleaning
machine. It is much faster and cleaner than cleaning by your hands.
2. Specification Of LanJ-J72X And Other Related Model:
| Model | LanJ-J36X | LanJ-J48X | LanJ-J72X |
| Tank size | 2000x200x400mm | 2400x220x500mm | 3000x220x500mm |
| Transducers qty | 36pcs | 60pcs | 72pcs |
| Tank capacity | 160L | 264L | 330L |
| Ultrasonic power | 1800W | 3000W | 3600W |
| Heating power | 1200W | 3000W | 6000W |
| Timer | 1S-99H adjustable | |
| Capacity | 40KHZ/28KHZ | | |
| Tank material | SUS304/SUS316, can be chosen |
| Voltage | AC 220V/380, 3 phases |
| Features | 1. With casters with brake. 2. With drying rack. |
3. Something about Blue Whale Blind Ultrasonic Cleaning Machine.
The blue whale blind ultrasonic cleaning machine is a kind of
ultrasonic cleaning equipment for the blind. The blind will be
covered with dust, tar, dead germs and some other pollutants if
used for a long time. Therefore, it is recommended to clean them
regularly, when cleaning need to add cleaning agent, enhance the
cleaning effect, regular cleaning maintenance can greatly improve
the service life of the blind.
Ultrasonic cleaning uses cavitation bubbles caused by
high-frequency pressure (sound waves) to agitate the liquid.
Agitation exerts a strong force on contaminants that adhere to
substrates such as metals, plastics, glass, rubber, and ceramics.
This action will also penetrate blind holes, cracks and recesses.
The aim is to completely remove all traces of contaminants that are
tightly attached to or embedded in a solid surface. Water or
solvent may be used depending on the type of contamination and the
work piece. Pollutants can include dust, dirt, oil, pigments, rust,
grease, algae, fungi, bacteria, lime dirt, Polish, flux,
fingerprints, soot and mold release agents, biological soil, and so
on.
Ultrasonic cleaning can be used for workpieces of various shapes,
sizes and materials, and parts may not need to be removed prior to
cleaning. Do not place objects at the bottom of the equipment
during cleaning as this will prevent cavitation on objects that are
not in contact with solvents.
4. Cleaning Effect:
5. Detail picture during production:
6. How To Clean Window Blind With Ultrasonic Cleaning Machine?
1). Make sure cleaning tank is clean before start the processs.
2). Pour water into cleaning tank.
3). Set the cleaning time and temperature you need.
4). Connect the power line and turn on the machine.
5). When the cleaning processs is over, pull out the window blind
from tank.
6). Put the window blind on drying track or hang on drying rack.
7). Turn off the machine and pour out the water.
8). Make the machine dry and clean especially the cleaning tank.
7. Blue Whale Ultrasonic Cleaner Care Instructions
1). The ultrasonic drive circuit board should be kept dry and
should not be stored in a humid environment, otherwise it will be
in the risk of burning out the machine.
2). Turn off the power of the ultrasonic generator when the
ultrasonic cleaner is not in use.
3). Avoid bumping or violent vibration to the machine.
4). Ultrasonic cleaner generator and cleaning tank should be far
away from heat source.
5). Try not to work the ultrasonic cleaner for a long time, stop
for more than 5 min. after working for several hours.
6). The machine should be placed in a ventilated place as much as
possible to facilitate the machine to dissipate heat.
7). It is strictly forbidden to start without water or fluid, must
work above the liquid level.
8). When the ultrasonic cleaning machine uses flammable liquid such
as alcohol, chemical to clean objects, please consult with our
customer service first before using the machine.
9). Try to avoid the use of strong acid and alkali cleaning agent.
10). In order to ensure the cleaning effect, the cleaning fluid
should be replaced in time.
11). After the cleaning is completed and the machine is turned off,
use a clean try rag to clean the tank body and its periphery after
pouring out the cleaning agent.
12). After using the cleaner, cover it, keep the shell clean, store
it in a dry, ventilated and dust-free place.
8. Packing Method: Wooden Case
