Hf Resistance Capacitive Discharge Multi Head Spot Welding Machine Water Cooling

Hf Resistance Capacitive Discharge Water Cooling Multi Head Spot Welding Machine

Product Introduction

The multi head spot welding machine is working on the 380V/50Hz three-phase AC power supply. By the three-phase rectifier, inverter technology and the feedback control system, to control the welding heat, pre-press time, the maintenance time and cease time, achieving the welding requirements. The welding machine is widely used in automobile, home appliances, electronic instrumentation, aerospace and other projection welding process industry.

Technical Parameters

Advantages

1. Stable machine structure upside and downside of electrodes apply the pressure mode with assistant stroke. The welding efficiency is much higher.

2. The transformer of welding machine adopts the special resistance welding machine, the silicon steel slice is featured of high magnetic: the inner water- cooled by force; stronger power and high duty ratio.

3. Controlled by micro-computer and can saved at most 16 sets of welding settings, which is quite convenient for different kinds of welding sheets.

4. Widely used in aerospace, automobile and automobile parts manufacturing, new energy and power battery and other special areas of high quality welding requirements.

Major Structure

Waterway (Cooling) System

The main water inlet pipe and outlet pipe are set at the rear of the welding machine. When the water inlet ball valve is opened, the water enters the distribution block and is divided into three ways: one way is connected with the water pipe of the welding transformer to cool the transformer; One way is connected in series with the water inlet nozzles of the upper and lower electrode welding arm body to cool the upper and lower electrode heads (one way is connected in series with the water inlet nozzles of the upper and lower projection welding platforms to cool the upper and lower projection welding platforms and the upper and lower projection welding electrodes); One circuit is connected with the water inlet nozzle of the thyristor (installed in the upper layer of the machine body), and the cooling thyristor. See the following figure for the water circuit (cooling) system.

Reference Pictures

Application

Frequently Asked Questions

1. When can you arrange shippment?
The shippment is 15 days after getting deopsit, but customized machines should be more than 25 days.

2.Do you inspect the finished products?
Yes, each step of production products will be came out inspection by QC department before shipping.

3.Are you factory?
Yes, we are factory, all machine is made by ourself and we can provide customize service according to your requirement.

4.How to buy your Spot Welder?
Please send us inquiry to our email, and we will give you a PI to send us payment.

5. How to contact you?
You can send a mail for us and call us.

6.How will you deliver my goods to me?
We always ship by air and sea in the mean time.

7.How about your transport packing? Is it possible to damage the machine during the transportation?
We have rich experience on international transportation. All the packing are extra thickness carton filling with protective PE foam and waterproof membrane. No damage happened during transportation until now.

8.What kind of payment do you accept?
T/T, Western Union, PayPal, .L/C, D/A, etc.