SM / MM Fiber Optic Splitter Box Light Grey 1x8 PLC Splitter

16Cores 1*16/1*8 PLC Fiber Optic Splitter Box SC/LC/ST/FC IP68 SM/MM Light Grey

Description

TW-FATM-0416S is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. It is one of Multicore fiber optic splicing box, the new model suitable for many situations and multidarious installation methods. It is fiber optic cable wiring terminals,mounted on the outside of the building,weather-proof box. It is ademarcation point during the fiber optic solutions.

Feature

► Total enclosed structure.
► Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging,protection level up to IP65.
► Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one.
► Cable,pigtails,patch cords are running through own path without disturbing each other,cassette type SC adaptor installation, easy maintenance.
► Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation.
► Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.

Specification

1. Environmental requirement

2. Main technical datasheet

3. Thunder-proof technical datasheet

The grounding device is isolated with the cabinet, isolation resistance is less than 2x10⁴ MΩ/500V (DC) ;

IR≥2x10⁴MΩ/500V

The withstand voltage between grounding device and cabinet is no less than 3000V (DC)/min, no puncture,no flashover;

U≥3000V

Configuration

Pic 1 Pic 2

Product inside structure and cable ways

1. 16W Lid; 10. FDB0212E C type flip plate;

2. 16W Base; 11. FB0212E B type flip plate;

3. Connecting screw; 12. FDB0212E A type flip plate;

4. Rubber seal; 13. Flip bracket;

5. Locked bolt; 14. FDB026H Fiber fixer;

6. 8B/12D Door clip; 15. FDB0212E Grounding bracket;

7. 8B/12D Door clip connecting bracket; 16. PG13.5 Water proof blocker;

8. Loop ring; 17. FDB0216W Cable exit mat;

9. The flap fixed bracket; 18. E type link-2;

19. E type link -1;Cable ways

Installation

► Wall-mounted installation

Drill 4 holes over the wall based on the size in table 1, place the expansion bolt Φ7.5*40, place the box to match up the holes and use bolt to fasten. (Pic 3)

► Pole-mounted installation

Fix 1 set of the easy pole ring to the telecom pole. (Pic 4)

Pic 3 Pic 4

Accessories
1. Instructions *1
2. key *1
3. Simple hoop *2, back sheet *2 (optional).
4. Accessory Bag *1

Application

In fiber-to-the-premises systems, the signal is transmitted to the customer premises using fiber optic technologies. An optical network terminal (ONT) is used to terminate the fiber optic line, demultiplex the signal into its component parts (voice telephone, television, and Internet access), and provide power to customer telephones.

Details Picture

► Can fix with 16ocs adapters and pigtails

► Also Can fix with 2pc 1*8 or 1*16 PLC LGX Box Type

FAQ

► What’s your advantage? Why we choose you?

1) 10 Years experience of fiber optic equipment and R&D. We have the most professional techniques and team. More advantage in price.

2) Great production capacity Sustainable Supply. According to customer requirements, We support the customized include package.

3) We use 100% new materials and the best production process, in consequence our defective rate is lower than 0.01%.

► What’s the Payment?

T/T would be better with quick transfer and few bank fees. LC could also be accept, but the procedure is complex and the fee is high. You can also use Western Union and Paypal. For large quantity, sea shipping can be provided.

► Are you a factory or trading company?

We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.

► How can I get some samples?

We are honored to offer you samples. New clients are expected to pay for the courier cost, the samples are free for you, this charge will be deducted from the payment for formal order.

► When can I get the price?

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

► How long can I expect to get the sample?

After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3-5 workdays.

You can use your own express account or prepay us if you do not have an account.

Hunan FOCONNEC was established in 2012, We are a professional producer specializing in manufacturing and marketing communication equipment of high-tech, including fiber optic Patch panels,splice closures with different models, optical fiber distribution frames, cross-connecting cabinets for optical communication cable, optical passive devices, products for cabling system and other plastic products.

We can offer FTTH Solution products, data center solutions products, ODN solutions products, optical fiber cabling products, and various optical fiber equipment, testing tools, help customers to purchase all-optical fiber products in one stop.

We are located in Shenzhen with convenient transportation. Our company adopts advanced manufacturing technology, high precision production and inspection equipment to supply high-quality products as well as timely and satisfactory after-sale service, We always insist on the policy of "Customer's demands is our pursue", Our products are exported to many foreign countries like USA, Canada, Australia, Spain, Brazil, Argentina, South Africa, Malaysia.

We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements, TWILIGHT OPTIC is looking forward to cooperating with you.