Rubber Mat Making Machine Rubber Tiles Press in Machine
product
SZ16-0.5MN (550x550x4) rubber tile vulcanizing machine
For rubber tiles product size: Max. 500mmx500mm
1. The Main Technical Parameters
| Number | Parameter | SZ16-0.5MN | Note |
| 1 | Total Pressure | 0.5MN | 50T |
| 2 | Plate Size | 550mmx550mm | Material:Q235 high quality carbon steel |
| 3 | Working layer number | Four layers | |
| 4 | Plate number | Five | |
| 5 | Plate Parallelism | No more than0.09mm | |
| 6 | Plate Surface Roughness | Ra no more than 1.6a(2.5um) | |
| 7 | Heating Mode | Electric heating | |
| 8 | The highest heating temperature | 200℃ | |
| 9 | Temperature control mode | Temperature controller | |
| 10 | Per square centimeter pressure | 17kg/cm2 | |
| 11 | Plate clearance | 160mm | |
| 12 | Piston stroke | 640mm | |
| 13 | Piston diameter | Φ200mm | Material:cold hard alloy steel |
| 14 | Cylinder number | One | Material:QT500-7 |
| 15 | The highest system pressure | 16Mpa | |
| 16 | Structure | Column type | |
| 17 | Pillar number | Four | Material:45#carbon steel |
| 18 | Pillar diameter | 50mm |
| 19 | Control system | Semi-automatic |
| 20 | Mold number | Four sets |
| 21 | Slide number | Eight sets |
| 22 | Payment | T/T 30% Advance payment |
| 23 | Delivery date | 30 workdays |
| 24 | Packing | Wooden case |
| 25 | Guarantee period | 12 months |
2. The Main Performance Features
2.1Cylinder adopts advanced sealing structure,reasonable
design,reliable
in Performance.
2.2 Piston:The material of cylinder is QT500-7 and the cylinder diameter is
Φ285mm.Through plunger surface hardening treatment,the hardness and
abrasion resistance of plunger improve.
2.3 Plate:Plate material adopts Q235A high quality carbon steel.After
artificial vibration or high temperature tempering aging treatment,
good surface finish, high resistance to wear.
2.4 Seal: oil cylinder sealers adopt YX type polyurethane oil seal, oil
resistant, aging resistant, resistant to wear and tear.
2.5 Heat insulation board: board is made of high quality calcium silicate board, pressure is
3.5 MPA, the thermal coefficient of 0.031.
2.6 Electrical system: the electrical device adopts Chint and Delixi brands.
2.7 Hydraulic system:Motor is produced by jinan or Qingdao famous manufacturer ,
domestic pump and the reversing valve, liquid valve are produced by
Taiwan KOMPASS.
3. Attached Pictures: the following pictures is for reference
Only.
Different kinds of molds (customized)
Auxiliary machine
