Waste Tyre Piece cutter from strip block cutter tire cutting
machine
product Introduction
tyre block cutting machine: is prepared for the crush of host
machine, Not only it makes the cutting strip-type waste rubber cut
into about 3*8cm small pieces, but also can enter into host machine
again through mutual use between sword and fixed knife, convenient
to feed, high output and won’t damage roller easily, power is
4.0kw, revolting speech is 380r/min,shape dimension: 1m*0.8m*1.4m.
To pay attention to the space between sword knife and fixed knife
when the machine is in operation, best to keep at around 0.1mm, so
that the steel wire can be cut off.
Features:
Unique design, high output and long lifetime blade characterize
secondary shredder and fine rubber shredder, which can improve the
working efficiency and lower equipment maintenance cost.
Double-grinding pan rubber grinder is featured for low energy
consuming and high output.
Reasonable construction, easy operation and low rate of breakdown.
Environmental-protection, no pollution(no waste gas, no waste
residue, no polluted water), meeting the environmental requirement
of the government.
Rubber powder production of waste tire recycling line is used to
crush the waste tire into rubber powder. Environmental protection
and energy saving, Market Prospect Broadness .
technique parameter
| Waste tire pretreating: Get 25-50mm blocks. |
| 1 | Ring cutter | QQJ-20 | 1 |
| 2 | block cutter machine | YQJ-285 | 1 |
| 3 | strip cutter | QTJ-380 | 1 |
| 4 | block cutter | QKJ-45 | 1 |
| Rubber powder treatment:5-30 meshes rubber powder. Separate steel
wire and fiber from rubber powder. |
| 5 | Two roll rubber crusher | XKP-400 | 1 |
| XKP-450 |
| XKP-560 |
| 6 | Main conveyor | BCL-8 | 1 |
| 7 | Small conveyor | BCL-3 | 1 |
| 8 | Double-deck magnetic separator | BMS-22 | 1 |
| 9 | Single-deck Magnetic | SMS-1 | 1 |
| 10 | Main vibrating sieve | BSS-8 | 1 |
| 11 | Small vibrating sieve | SSS-3 | 1 |
| 12 | Fiber Processing Equipment | FS-1100 | 1 |
Second Production capacity and energy consumption ,you can choose suitable
line
| NO | MODEL | Total Power(KW/h) | Production Capacity (kg/h) |
| 1 | XKP-400 line | About 103.2kw | 200-300kg for around 10-30 mesh rubber powder. |
| XKP-450 line | About 113.2kw | 400-500kg for around 10-30 mesh rubber powder |
| XKP-560 line | About 132.2KW | 600-1000kg for around 10-30 mesh rubber powder. |
| Floor space:About 20*8 m2, Workers needed:3 operator and 1
maintainer |
N
