product Introduction
Tire Waste tire sidewall cutter tire cutting machine is used to
separate the tire side from the tire body. Now the steel wire
inside the tire sides of vacuum tires is very strong and hard to
bend and cut. To save place for storage or convenient transport,
it's better to cut the tire sides from the tire body. And the steel
wire inside the tire ring also can be separated by a tire steel
wire separator for further process or recycle use.
With the rapid development of the world automobile industry and
transportation industry, the demand of all kinds of tires are
increasing day by day. At present, more than billions of tires are
sold all over the world every year. According to the research,
50-55% raw rubber are used for the tire manufacturing every year.
For security, automobiles should change tires after every
30,000-50,000 km trip distance. In this way, billions of waste
tires, about 17 millions tons can be produced in one year. And
waste tires is a kind of non-fusible or refractory polymer
elastomer materisl, which will take hundreds of years to decompose.
With the time goes, the waste tire problem has become serious to
environment. How to dispose the waste tires also become more and
more important in every countries.
Because of this, except the tire pyrolysis machine, the rubber
powder production line is another new develop and design equipment
used for recycling waste tires to rubber pwder for recycle use.
Rubber powder production of waste tire recycling line is used to
crush the waste tire into rubber powder. Environmental protection
and energy saving, Market Prospect Broadness .
Technical Parameters of Waste tire sidewall cutter tire cutting
machine
| Motor power | 3Kw |
| capacity(kg/h) | 300-500kg/h |
| Ratation speed | 15r/min |
| Dimension | 1200*1400*1300 |
| Weight | 600kg |
| Tire processing size | 650-1200mm |
