Diameter 1500mm Curing Chamber 1.5m Vulcanizing Tank For Truck Tire
Retread
Diameter 1500mm (1.5m) vulcanizing tank is used for curing and
molding of retreaded tires in cold rolling.
This equipment adopts three heating methods, namely heat transfer oil, steam and electric heating, which is more
suitable and convenient for the use of customers.
We can customize curing chamber according to your tire size.
Gerneral Specification for Reference
| Temperature | 110 ~ 125°C |
| Capacity | 24 tyres |
| Service Pressure | 0.5-0.7Mpa |
| Chamber Diameter | 1500mm |
| Range | Tire below 1.2m |
| Total power electricity | 103.5 Kw |
Diffierent types rubber vulcanizing tank,Can be designed according
to your output.
Tire Retreading Process As Following
tyre clean firstly dry tyre → inspecting tyre → buffing tyre →
buffing outer wound of tyre → buffing inner wound of tyre →
secondly inspecting tyre → repair inner wound → brushing adhesive
on roof of tyre → secondly drying tyre → repair outer wound → affix
middle rubber piece → tread building →assemble envelop → assemble
inner tyre → assemble curing rim → inspecting inner tyre and curing
rim → curing→ disassemble curing rim→ disassemble inner tyre →
disassemble envelop → inspect end product → embellish tyre→ store
tyre.
Our factory provides whole set tire retreading solutions for
clients who wants to set up a new retreading factory/plant.
Such as Free Layout your workshop, Free Training your worker.
Related Tire Retreading Machines
