Tape Adhesive Test Machine Constant Temperature Holding Force
Tester
Test principle:
Test board with adhesive tape vertically hang on the test rack, and
hang stipulate weight of weights at end, arrording to the displacement of the sample after a certain time or the time of
complete departure of the sample To test the ability of adhesive
specimen to resist pulling.
Design Standard:
1. GB 4851 pressure sensitive adhesive tape holds the viscosity
test method
2. JIS Z0237 pressure sensitive adhesive tape and pressure
sensitive adhesive sheet test method
3. ASTM D3654 pressure sensitive band shear viscosity test method
Specification :
| Number of test group: | 10 groups |
| Standard roller: | 2000g±50g |
| Weights: | 1000g±10g(Contains the load board weight) |
| Test plate size | 50(L)mm×50(W)mm×1.5(D)mm |
| Auto-timer: | 0~9999H,59Min,59sec Switchable |
| Temperature Control: | Normal Temperature~200℃ |
| Temperature Display: | 0.1 ℃ |
| Heating Mode: | Heated air circulation |
| Weight: | 105KG |
| Size: | 97*55*110cm |
Product Usage
Using the inclined surface rolling ball method, the initial
adhesion of the sample is tested by the effect of the adhesive
tape, label and other products on the steel ball when the steel
ball and the viscous surface of the test sample are in short-term
contact with a small pressure.
This machine can be applied to test lots of materials in tension,
compression, tear, peel (can 90 degrees and 180 degrees) and other
mechanical test, such as rubber, tires, belt, shoes, plastic, film,
acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite
materials, waterproof materials, fibers, textiles, wire and cable,
paper, gold foil, ribbons,thread, spring, wood,medicine packaging
materials, tapes etc.
