High Speed Paper Egg Tray Production Line For Packaging Eggs /
Fruit
Machine introduction
1. This machine mainly produce the pulp molded products,such as egg
tray ,egg box, fruit tray,coffee tray.
2, The material for the molded pulp products is waste
paper,corrugated paper,waste newspaper,magazine.
3,The Molding machine part is 8 faces rotating drum, each surface
has 5 moulds. So there are 24 moulds and other have 5 transfer
moulds. The moulds material can use plastic or aluminous depend on
buyer's request.
Main components
(1):Pulping system of Eggs Tray Machine:
Paper pulp making is the first step of the pulp mold products .The
major equipment are:Hydraulic pulper ,pulp pump,water
pup,stirrer,screen machine(vibration sieve,refiner machine and
control cabinet. Hydraulic pulper and refiner machine are two major
equipment in this system.
(2):Forming system of Eggs Tray Machine:
This part mainly is the egg tray forming machine. We could produce
the forming mould and transfering mould based on our customers
request. The material of the mould could be Alumminum, Resin,
Plastic. And we can produce 4face,8face,12face rotory Egg Tray
Machine.
Generally speaking the pressure indication of the vacuum should
between 0.03-0.04,The gas tank should between 0.6-0.8 .when both of
them satisfy the requirement at the same time .the product will
have high effect and stable quality.
(3):Drying line of Eggs Tray Machine:
The drying of the product is very important ,it is directly related
to the humidity of the products. The whole system is droved by the
conveyor. The drying line including front transmission, rear drive,
driver, air blower ,bellows ,damp-proof machine ,valves and burners
Adopt tunnel type drying line, Chain drive smoothly and installs
single burners. Using single wind mouth drying, Heated evenly,
product little deformation, stable quality. Moisture recycled
second use, environmental protection and energy saving. Multi-layer
drying line can save floor space
So We can supply Single layer or Multi layer dryer for our
client.If your factory is not long enough,You can chose our Multi
layer dryer.
(4):Packing machine of Eggs Tray Machine:
This is the last step of Egg Tray Machine, when we get the finished
tray from the drying line, we can packing the egg tray.
Automatic stacking and counting machine: Collect the egg trays and
put them in order automatically, counting with induction.
Technological process
Feature of Egg Tray Making Production Line/waste Paper Pulp Egg
Tray Machine
| 1 | High automation, low labor cost |
| 2 | Low production cost |
| 3 | Energy saving(by 30%-50% compared with other manufacture) |
| 4 | Water saving(complete water treatment system equipped) |
| 5 | Efficient Multilayer dryer, saving space(by 33% compared with
traditional dryer) |
| 6 | Stable final product quality(same weight, same dimention, strong
and good look) |
Application scope
