Thigh, calf prosthesis protection, prosthetic non-slip protective
cover, to extend prosthetic life
Wear training
One, wear a prosthesis
The residual limb sets in the residual limb, residual limb end to
stay some margin, so as not to oppress the end of the residual
limb. And then put on a soft bushing, and then the residual limb
into the receiving cavity.
Second, standing training
In order to make the center of gravity perpendicular to the
metatarsophalangeal joint parts of the heel between the center,
standing, the body slightly forward force, do not let the front
buffer relaxation, standing to the legs evenly bearing the weight,
initially added to the prosthesis Weight is only the whole weight
of 1/3.
Third, with the lower limb prosthetic standing leg training
With the lower limb prosthesis standing on the legs of the training
in the parallel bar, pay attention to keep the pelvis level, when
the upper body has a feeling of back to the side of the fist is
just right. At the beginning of the hands of the bar, the last
hands to leave the parallel bars.
Fourth, the parallel bar within the walking training
Note that the pace of foot should be consistent. In principle, the
prosthetic side of the step is slightly shorter. In order to
prevent the heel touch the ground caused by playing soft legs,
quadriceps to force to compete. In the case of the use of static
ankle soft and fake foot, there should be followed by the feeling
of subsidence.
Five, parallel bars outside the walking training
If you can walk in the parallel bars with both hands can not walk,
then walking in the training room can be easier. To get good gait,
try to narrow your feet. Be careful not to bow when walking, eyes
flat distance, so the body will naturally straighten. When you can
walk on the ground, then to the uneven road, ladder, walking on the
road.
Daily maintenance
In order to maintain the normal function of prostheses, to extend
the service life, should pay attention to the following routine
maintenance of artificial limbs.
Daily maintenance
In order to maintain the normal function of prostheses, to extend
the service life, should pay attention to the following routine
maintenance of artificial limbs.
First, keep the inside of the cavity clean. If the internal cavity
is unclean, it will increase the risk of skin loss. Every night
before going to bed will receive the cavity (inner liner) inside
the surface with warm water cleaning, wipe clean.
Second, regular cleaning and replacement of residual limb sets.
Third, if you accept the cavity somewhere tenderness residual
limbs, you can use the hollowing out the tender parts of the pad or
fill the tender parts with blankets around the way to solve.
Fourth, when you feel the relaxation of the cavity, the first to
increase the residual limb sets of methods to solve; if still too
loose, can be in the lining of the lining of a layer of blankets to
solve. If necessary, replace the new receiving cavity.
5, plastic shell prosthesis, can not be placed next to the high
temperature container. Cold, it can not use the fire after the use
of warm, to prevent deformation, and affect the use of the effect.
Six, due to perspiration stained leather class with alkaline
detergent or soap to wash, washed and then coated with leather oil.
Seven, before the use of prostheses, often to see the knee, such as
the discovery of open lines or cracks to be timely sewing.
8, before the use of prostheses, to regularly check the prosthetic
joints, with or without loose phenomenon, such as the phenomenon
found to loose, to be timely and solid maintenance. To prevent a
greater degree of damage and fall risk, therefore, in the use of
prostheses should maintain the best condition.
9, prosthetic off, to rely on the wall or flat on the ground or on
the desktop, do not put heavy objects on top to prevent
deformation, and affect the use.
10, artificial limbs is strictly prohibited water soaking,
otherwise affect the use of results.
| Color | Size | Samlpe time | Shipping method |
| complexion | S,M,L,XL,XXL | 1 Days | Courier |
| Can be customized size | | vessel |
