Air flotation waste water recycling systems for effluent and industrial paint

Waste water recycling treatment for effluent water treatment and industrial paint waste water reuse 40m3/h

Typical process flow chart

Technical description about sewage water purification

The wastewater contains both water / liquids and solids impurities of various sorts and origins, sewage purification are designed to remove as much as possible or needed of the solids, other obstructions, and biological and chemical contaminants.

The main pretreatment stages are usually are:

• Pretreatment: screening and removal of solids (mainly inorganic solids) from the wastewater, sometimes also by sedimentation. After this grit removal is next.
• Primary treatment: mainly done by sedimentation in large basins or tanks, this separates sludge and other materials such as fat from the wastewater. The primary treatment stage of sewage purification is complex, has a lot of methods and is the longest.

Sewage water purification methods:

• Anaerobic or aerobic digestion of contaminants – mainly for sludge.
• Constructed wetlands that have plants that oxygenates the water and absorbs toxins.
• Sedimentation and oxygenation lagoons
• Incineration of treated sludge.
• Producing fertilizers from treated sludge.
• Filter and/or oxidizing beds.
• Nutrient, Nitrogen, Phosphorus removal

Waste water purification for recycling use Sample1 - 100m3/h

Untreated Raw water chemical analysis data

Treated waste water for reuse.

Competitive advantage:

Years of experience and professional engineers in the industry.

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.