Medium Size ASP air separation plant Nm3/h Blanketing Gas High Purity

Air Separation Unit Nm3/h KDON-3200(50Y)/3500 Blanketing Gas

Specifications:

Air Separation Unit Series KDON-3000~3200 Nm3/h (GOX)

Typical Product: KDON-3200(50Y)/3500 Air Separation Unit

Output, purity and pressure

Description:

 The process employed by this KDON-3200(50Y)/3500 air separation unit utilizes molecular sieve to purify air under normal temperature, production of refrigerating capacity produced by booster expansion turbine. The fractionating column utilizes convection sieve plates.

The pre-cooling system utilizes air cooling tower for pre-cooling. The water supplying of air cooling tower is divided into two sections: the lower section utilizes the cycling water of water processing, and the upper section utilizes the low temperature water cooled by water cooling tower WC and water chilling unit. The mesh mist eliminator is set on the top of air cooling tower, which can prevent the moisture being taken out, and remove the water drops in the air. The air expanded by expander is sent to upper column to be rectified. Obtain liquid air at the bottom, and obtain pure liquid nitrogen at the top of lower column. Product oxygen is obtained at the bottom of upper column and sent to user as product. Liquid oxygen extracted from the bottom of condenser evaporator is sent to storage tank. The pure nitrogen and liquid nitrogen are extracted from the top of column, pure nitrogen goes out of cold box after being re-warmed in sub-cooler and main heat exchanger, and then it is sent to the user as the product. The liquid nitrogen goes out of cold box to storage tank.

Applications:

1. Control Atmosphere Gas
2. Environmental Calibration Gas
3. Blanketing Gas
4. Tempering Gas
5. Agriculture
6. Health care

Competitive Advantage:

1. Our company’s economic effectiveness is in the lead of the industry in China
2. Short time delivery. Good service.
3. The life span is over 20 years
4. Widely sales around the world
5. Economization of energy

       Hangyang Cryogenic Liquefaction Equipment Co., Ltd. is one of the holding subsidiaries of Hangyang Co.,Ltd.(stock code:002430), it is organized on the basis of the original Small Scale of ASU Company of Hangzhou Hangyang Co,.Ltd. It is the major engineering, research and manufacturing base for small size of ASU and liquefaction plants in China, It is located in Hangyang Manufacturing Base in Lin'an Economic Development Zone, the address of sales office is No. 592, Zhongshan North Road, Hangzhou. It undertakes engineering consulting, design and manufacture, assembled construction design, installation and commissioning and supply of parts for medium and small size of ASU with its professional quality. It is the main base of design, research and manufacture for the domestic medium and small size of oxygen/nitrogen generating plants, liquid oxygen/liquid nitrogen plants, oxygen/nitrogen liquefiers, high-purity nitrogen generators, vacuum pipes and Pressure Swing Adsorption (PSA) for oxygen/nitrogen generating, etc.; Meanwhile, it is also the professional manufacturer for integrated assembly or skid type of medium size of ASU for leaving workshop by Hangyang, its abilities of design and manufacture for integrated assembly of medium size of ASU reach the leading domestic level. Our company has the independent import and export trade qualification.

      Our company possesses professional technical personnel teams of design and EPC engineering of ASU and also possesses design ability of product such as independent process calculation, project design, unit design, project EPC. The manufacture base of our company was relocated to new site in 2009. Recently, the floor area is 40.34 acres. Combinating with relocation, the imported and set-up professional manufacture production tools, moulds and equipment forms the manufacture ability for manufacture ASU whose capacity is below 30,000Nm3/h. Our company carries out the international administration concept and obtains authentication certificates of management system such as ISO9001, ISO14001 and OHSAS18001 of DET NORSKE VERITAS. Meanwhile, we obtains manufacturing license for pressure vessels manufacture D1 and D2, Zhejiang new high-tech enterprise certificate and small and medium-sized technology-based enterprise certificate, our company possesses impeccably professional manufacturing credentials for medium and small size of ASU.   

     Our company sets product research, manufacture, marketing and service in one to elaborately provide general customers superiorly coordinated service on the basis of decades experience in design and manufacture and administration concept by Hangyang. Products involve aspects such as metallurgy, petrifaction, electron, machinery, building materials and aerospace. Our products are not only sold well throughout China, but also sold to the West, and our company becomes the designated supplier for several well-known gases investment companies abroad. In the cooperation with transnational large gases companies, our company absorbs and imports the advanced design concept, strict administration program, exquisite manufacturing technology so as to lead our company to develop in the direction of diversification, exquisite products and large-scale. Hangzhou Hangyang Cryogenic Liquefaction Engineering Co., Ltd. undertakes EPC works of ASU under our company.