Low Pressure Argon Generator Liquid oxygen equipment 99.9995% Ar

Argon plant 20 Nm³/h ~ 700 Nm³/h KDONAr-1200Y/1000/35Y Low Pressure Argon Generator Liquid oxygen equipment 99.9995% Ar

Specifications:

Argon Plant KDONAr-20~700 Nm3/h Series

Typical Product: KDONAr-1200Y/1000/35Y Argon plant
Output, purity and pressure

Description:

The air is cleaned of large particles impurities with feedstock filter, and then goes into compressor to be compressed, and then goes into air cooling & water cooling tower to be cooled. The cooled air goes through molecular sieve adsorber, and then goes into heat exchanger to reach saturated condition, and then goes into fractionating column to get product.

According to different requirements, the internal compression air separation plant owns various process types. The typical process of current manufactured internal compression process air separation plant is expanded air going into lower column, which has two features: the first is that it is appropriate for producing large liquid amount; the second is that argon extraction rate is high. In additional, this process has a benefit that the feed air compressor and air booster can be combined to all-in-one machine.

There are many internal compression types, and different process is appropriate for different product requirements of oxygen, nitrogen and argon. It can be classified into three according to the difference of process types: the first is air boosting circulating and nitrogen boosting circulating; the second is expanded air going into lower column and expanded air going into upper column; the third is single pump internal compression and mult-pumps internal compression.

PFD



Applications:

We supplied the plants to many countries such as USA, Germany, Mexico, Indonesia, North Korea, Czech, Switzerland, Spain, Myanmar, Vietnam, Thailand, Russia, Mongolia, Syria, India, Kazakhstan, Iran, Saudi Arabia, Egypt, Brazil, Hungary, Malaysia, etc.

Competitive Advantage:

1. Low noise
2. Less quick-wear parts, easy maintenance
3. Oxygen channel is completely isolated from the outside world, so that the oxygen is non-pollution, and the purity without drop.
4. The safety, reliability and maintainability are fully considered in the general design of the fractionating column system.
5. The waste nitrogen vent valve employs pre-opening type to prevent building the pressure of the upper column.
6. The feed air compressor is equipped with impeller cleaning mechanism to descale and clean the impeller easily, which can make the compressor run under the efficient condition, and it is also a very important measure for the safe running of the compressor.

       Hangyang Cryogenic Liquefaction Equipment Co., Ltd. is one of the holding subsidiaries of Hangyang Co.,Ltd.(stock code:002430), it is organized on the basis of the original Small Scale of ASU Company of Hangzhou Hangyang Co,.Ltd. It is the major engineering, research and manufacturing base for small size of ASU and liquefaction plants in China, It is located in Hangyang Manufacturing Base in Lin'an Economic Development Zone, the address of sales office is No. 592, Zhongshan North Road, Hangzhou. It undertakes engineering consulting, design and manufacture, assembled construction design, installation and commissioning and supply of parts for medium and small size of ASU with its professional quality. It is the main base of design, research and manufacture for the domestic medium and small size of oxygen/nitrogen generating plants, liquid oxygen/liquid nitrogen plants, oxygen/nitrogen liquefiers, high-purity nitrogen generators, vacuum pipes and Pressure Swing Adsorption (PSA) for oxygen/nitrogen generating, etc.; Meanwhile, it is also the professional manufacturer for integrated assembly or skid type of medium size of ASU for leaving workshop by Hangyang, its abilities of design and manufacture for integrated assembly of medium size of ASU reach the leading domestic level. Our company has the independent import and export trade qualification.

      Our company possesses professional technical personnel teams of design and EPC engineering of ASU and also possesses design ability of product such as independent process calculation, project design, unit design, project EPC. The manufacture base of our company was relocated to new site in 2009. Recently, the floor area is 40.34 acres. Combinating with relocation, the imported and set-up professional manufacture production tools, moulds and equipment forms the manufacture ability for manufacture ASU whose capacity is below 30,000Nm3/h. Our company carries out the international administration concept and obtains authentication certificates of management system such as ISO9001, ISO14001 and OHSAS18001 of DET NORSKE VERITAS. Meanwhile, we obtains manufacturing license for pressure vessels manufacture D1 and D2, Zhejiang new high-tech enterprise certificate and small and medium-sized technology-based enterprise certificate, our company possesses impeccably professional manufacturing credentials for medium and small size of ASU.   

     Our company sets product research, manufacture, marketing and service in one to elaborately provide general customers superiorly coordinated service on the basis of decades experience in design and manufacture and administration concept by Hangyang. Products involve aspects such as metallurgy, petrifaction, electron, machinery, building materials and aerospace. Our products are not only sold well throughout China, but also sold to the West, and our company becomes the designated supplier for several well-known gases investment companies abroad. In the cooperation with transnational large gases companies, our company absorbs and imports the advanced design concept, strict administration program, exquisite manufacturing technology so as to lead our company to develop in the direction of diversification, exquisite products and large-scale. Hangzhou Hangyang Cryogenic Liquefaction Engineering Co., Ltd. undertakes EPC works of ASU under our company.