Plastic Rapid Prototype SLS 3D Printing / Rapid 3d Prototyping OEM
What is SLS 3d printing ?
Selective laser sintering (SLS), also known as selective laser
sintering the powder material, laser sintering or powder sintering.
That is, the material on the surface of the powder pavers already
molded parts and evenness, and then use high-intensity laser on a
new layer just scan the parts shop section; material powder under
high-intensity laser irradiation are sintered together, give a
cross section of parts, and the shaped portion is connected to the
following; when a layer cross-section after sintering, covered with
a new layer of powder material, sintering the lower layer is
selectively cross-section. SLS technology principle is to form a
three-dimensional solid by an infrared laser beam material is
heated thermoplastic powder sintering. By laser beam thin layers of
powder material is sintered piled repetitive. With the sintered
powder material superimposed layers, forming a pre-set final
desired size and shape.
Why choose Strongd model technology for sls rapid prototype?
SLS advantage on the one hand reflected in the relatively wide
range of material selection, utilization, such as nylon, synthetic
rubber, especially in the manufacture of metal parts can make this
process attractive; the other hand, the manufacturing process is
relatively simple, high precision, while using high temperature
sintering material molded parts in strength and hardness are
particularly impressive.
Strongd Model Technology has our own sls 3d machine .we can do the
best rapid prototype for you if you provide the 3d drawing and your
requirement of details
