Home > Terminals >

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

Ask Lasest Price
Brand Name :	HRT
Model Number :	C4255M-T
Certification :	ISO9001/ ISO14001/UL/RoHS/REACH
Price :	Negotiated
Payment Terms :	TT, Western Union, PayPal, L/C
Supply Ability :	100 million pcs per month
Delivery Time :	5 to 8 working days after payment checked

Add to Cart

Product Details
Company Profile

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

4.20mm Pitch Board To Wire Connectors , Crimp Style Connectors C4255M-T

1, The specification of the product including basic size information, electrical and mechanical properties.

Basic size information
Termination Interface Style		crimp or compression
Processing methods		E-stamping before tin-plated
Insulation O.D.		3.10mm(Max)
Part No.		C4255M-TPE or C4255M-TPE-H or C4255M-TPE-TH
Application		signal

Electrical properties
Current Rating		9A AC, DC
Voltage Rating		600V AC, DC
Contact Resistance		10mΩ Max
Insulation Resistance		1000mΩ min
Withstanding Voltage		1500V AC/minute

Mechanical properties
Temperature range		-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!

1. Scope

This specification covers the requirements for product performance of 4.20mm pitch wire to board

& wire to wire connectors series.

2. Construction,Dimensions,Material & Plating

See the attached drawings

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	600V AC/DC		Insulation O.D. 3.10mm (Max.)
Rated Current (Max.) And Applicable Wires	AWG#14	6A AC/DC
	AWG#16
	AWG#18
	AWG#20	5A AC/DC
	AWG#22	4A AC/DC
	AWG#24	3A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	10mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	1000MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 1500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.), 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#14	11.0kgf (Min)
			AWG#16	10.0kgf (Min)
			AWG#18	9.0kgf (Min)
			AWG#20	6.0kgf (Min)
			AWG#22	4.0kgf (Min)
			AWG#24	3.0kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	1.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	3.00kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	3.00kgf (Min.)
5-6	Latch Yield Strength	Mate connectors and pull apart until both latches break at the speed rate of 25±3mm / minute	7.0kgf (Min.)
5-7	Panel Mount Retention Force	Insert the housing into panel cut out, push housing opposite the way it was assembled until the locking barbs break at the speed rate of 25±3mm / minute.	16.0kgf (Min.)
5-8	Durability	When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 20mΩ (Max.)
5-9	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-10	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JISC0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 20mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 20mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 20mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 20mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

6-9

Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

Solder pot method

Soldering time: 10±0.5 sec.

Solder Temperature: 260±5℃

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

Circuits	At Initial		Circuits	At Initial
Circuits	Insertion (Max.)	Withdrawal (Min.)	Circuits	Insertion (Max.)	Withdrawal (Min.)
Single	0.70	0.20	10	7.00	2.80
02	1.40	0.50	11	7.70	3.05
03	2.10	0.75	12	8.40	3.30
04	2.80	1.10	14	9.80	3.90
05	3.50	1.35	16	11.20	4.40
06	4.20	1.60	18	12.60	5.00
07	4.90	1.90	20	14.00	5.60
08	5.60	2.20	22	15.40	6.10
09	6.30	2.50	24	16.80	6.70

3, FAQ

Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.

Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed country, delivery by Fed x/UPS/DHL is normally 2-3 days(excluding weekends).

Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.

4, we can offer multiple, safe and fast shippment for you!

We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.

Product Tags:

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

Crimp Terminal Connector

Connector Crimp Terminal

4.20mm Pitch Wire To Wire Connectors terminals male crimp terminals tin-plated terminals

You May Like

Crimp Wire Connector Terminals Tin Plated Phosphor Bronze Connectors For AWG30# To 26#

ISO Wire To Wire Connector Terminals 2.50mm Pitch Connector Crimp Terminal

2.0mm Pitch Wire To Wire Connector With Tinned Brass Male Terminals Female Contact

Wire To Wire Connector Terminals Crimp Terminals With Tinned Phosphor Bronze Contact

Tin - Plated / Gold - Flashed Brass Crimp Terminal Connector 2478 Equivalent 18 - 24 AWG


*From:	Your email address is incorrect!
*To:	RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!