Ptich 1.27mm Wire Connector Terminals A3800-T With Phosphor Bronzne
Material
1, The specification of the product including basic size
information, electrical and mechanical properties.
| Basic size information |
| Termination Interface Style | crimp or compression |
| Processing methods | E-stamping before gold-plated |
| Insulation O.D. | 2.10mm(Max) |
| Part No. | A3800-G3PE or A3800G5PE |
| Application | signal |
|
| Electrical properties |
| Current Rating | 1.5A AC, DC |
| Voltage Rating | 15V AC, DC |
| Contact Resistance | 20mΩ Max |
| Insulation Resistance | 1000mΩ min |
| Withstanding Voltage | 500V AC/minute |
|
| Mechanical properties |
| Temperature range | -25℃ to 85 ℃ |
Other information please kindly check the following picture.
|
2, Related drawing and report
The following pictures are engineering drawing and testing report
for your reference, wish these can help you to purchase the ideal
and right parts from us. Thank you!
1. Scope This specification covers the requirements for product performance
of SATA 1.27mm pitch pothook connectors series.
2. Construction,Dimensions,Material & Plating See the attached drawings
3. Ratings & Applicable Wires
| Item | Standard | | Rated Voltage (Max.) | 15V AC/DC | Insulation O.D. 2.10mm (Max.) | | Rated Current (Max.) And Applicable Wires | AWG#18 | 1.5A AC/DC | | AWG#20 | 1.5A AC/DC | | AWG#22 | 1.5A AC/DC | | Ambient Temperature Range | -25℃ ~ +85℃* |
*: Including terminal temperature rise
4. Electrical Performance
| Test Description | Procedure | Requirement | | 4-1 |
Contact Resistance
| Mate connectors, measure by dry circuit, 20mV Max., 10mA.(Based
upon JIS C5402 5.4) | 20mΩ (Max.) | | 4-2 | Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground.
(Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) | | 4-3 | Dielectric Withstanding Voltage | Mate connectors, apply 500V AC (rms) for 1 minute between adjacent
terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method
301) | No Breakdown. | | 4-4 | Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry
circuit, 20mV (Max.)., 10mA. | 10mΩ (Max.) |
5. Mechanical Performance
| Test Description | Procedure | Requirement | | 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | | 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#18 | 6.0 kgf (Min.) | | AWG#20 | 5.0 kgf (Min.) | | AWG#22 | 4.0 kgf (Min.) | | 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.80 kgf (Max.) | | 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 3.00 kgf (Min.) | | 5-5 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute. | Contact Resistance 40mΩ (Max.) | | 5-6 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) | | 5-7 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS
C0041/MIL-STD-202 Method 213B Cond. A) |
|
6. Environmental Performance And Others
| Test Description | Procedure | Requirement | | 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) | | 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond.
A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) | | 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | | 6-4 | Humidity | Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 | | 6-5 | Temperature Cycling | 5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 40mΩ (Max.) | | 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt
spray from the 5±1% solution at 35±2℃. (Based upon JIS
C0023/MIL-STD-202 Method 101D Cond. B) | | 6-7 | Solder-ability | Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ | Solder Wetting 95% of immersed area must show no voids, pin holes | | 6-8 | Resistance to Soldering Heat | Solder pot method Soldering time: 10±0.5 sec. Solder Temperature: 260±5℃ Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ | Appearance No Damage. |
7. Actuator Insertion/Withdrawal Force [Unit : kgf] | Circuits | At Initial | | Insertion (Max.) | Withdrawal (Min.) | | - | 4.50 | 1.00 |
|
3, Application fied of product
The terminal will be used with the A3800 series housing, and the
will work together to perfomance well
in current and signal transmission.
4, FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.
Q:How long does shipping take?
A:It depends on the destination location and quantity. In most
developed country, delivery by Fed x/UPS/DHL is normally 2-3
days(excluding weekends).
Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.
5, we can offer multiple, safe and fast shippment for you!
We have very good cooperation with world famouse delivery company,
and the can offer us good service and favorable price. It's sure
that every business between us will be fast and happy. Choose us!
Let's connect the realistic and electronic world.
