1, Detailed specification of this product
The data in attached excel will be useful for you to choose right
parts. And for this wafer, the associative
housing is available too. Welcome you to buy it.
| Basic size information |
| Category | Wafer |
| Application | Signal, wire to board |
| Pitch | 1.25mm |
| Flammability | UL94V-0 |
| Panel mount | Yes |
| Pin material | Phosphor bronze/tin-plated |
| Circuits | 2 to 16pins |
| Wire insulation diameter | 0.90mm Max. |
|
| Electrical feature |
| Current Rating | 1A AC, DC |
| Voltage Rating | 125V AC, DC |
| Contact Resistance | 20mΩ Max |
| Insulation Resistance | 100mΩ min |
| Withstanding Voltage | 500V AC/minute |
|
| Mechanical feature |
| Temperature range | -25℃ to 85 ℃ |
| Other information please kindly check the following picture. |
2, Related drawing and report
Folllowing pictures are out testing report and exact engineering
drawing for your information, please kindly check it, wish it can
help you to get what you really need.
Testing report
Mechanical Performance
| Test Description | Procedure | Requirement |
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm /
minute. | Refer to paragraph 7 |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) |
| AWG#32 | 0.5kgf (Min) |
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 0.50kgf (Min.) |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.50kgf (Min.) |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute. | Contact Resistance 40mΩ (Max.) |
| 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS
C0041/MIL-STD-202 Method 213B Cond. A) |
Actuator Insertion/Withdrawal Force
[Unit : kgf]
| Circuits | At Initial | Circuits | At Initial |
| Insertion (Max.) | Withdrawal (Min.) | Insertion (Max.) | Withdrawal (Min.) |
| 02 | 2.00 | 0.28 | 11 | 6.50 | 0.62 |
| 03 | 2.50 | 0.30 | 12 | 7.00 | 0.65 |
| 04 | 3.00 | 0.33 | 13 | 7.50 | 0.68 |
| 05 | 3.50 | 0.38 | 14 | 8.00 | 0.71 |
| 06 | 4.00 | 0.43 | 15 | 8.50 | 0.74 |
| 07 | 4.50 | 0.48 | 16 | 9.00 | 0.77 |
| 08 | 5.00 | 0.53 | 17 | 9.50 | 0.80 |
| 09 | 5.50 | 0.56 | 18 | 10.00 | 0.83 |
| 10 | 6.00 | 0.59 | | | |
3, Application fied of these product
This product is developed for PDP, LCD, or small electronics
equipment. It is with strong structure against external force. This
product is widely used in household appliance, computer,
communication device. Because we can controll NPL ratio in a very
low level, so our parts are got recognition by famouse and
international company like TPV, LeTV, Emerson, Amphenol
Corporation, LuXshare, BYD etc. And the all products are
certificated by REACH, UL, RoHS. In order to protect the
evironment, some parts are halogen free. You can know the series
product of A1250 model.
4, FAQ
Q: What's your manufacture capability?
---- We use Sodick/AutoCAD to frabricate die inserts, dimension we
can do is +/-0.005mm.
Q: Can you make all the dimensions are according to our
design/sample?
---- We can guarantee that all the dimensions are made according to
your
drawing/sample. Please notice that dimension tolerence we can do is
+/-0.003mm.
Q:Did the mold suit for my press machine?
---The mold is made according to your press machine’s
specification. Before start making
die parts,we will send the design for your approval.
Q:What’s your advantage compare with other supplier’s on the
market?
----We are stamping factory,have a team contains die design,making,
maintance and stamping
production. We know how important the good mold for stamping
production.
----All our engineers are with more than 12 years working
experience.They are more
professional on precision stamping field.
----We have been approved by the thrid party, if you want, the
report will be passed to you.
