1, The specification of the product including basic size
information, electrical and mechanical properties.
| Basic size information |
| Color | White |
| Pitch | 2.0mm |
| Contacts type | Right angle |
| Material | PA66 |
| Circuits | 2 to 15pins |
| Wire insulation diameter | 1.30mm Max. |
| Terminal material | Brass |
| Finish terminal | Tin-plated |
|
| Electrical properties |
| Current Rating | 2A AC, DC |
| Voltage Rating | 250V AC, DC |
| Contact Resistance | 20mΩ Max |
| Insulation Resistance | 1000mΩ min |
| Withstanding Voltage | 800V AC/minute |
|
| Mechanical properties |
| Temperature range | -25℃ to 85 ℃ |
| Other information please kindly check the following picture. |
2, The picture display of these series product
Measuring 2.0mm in pitch, 6.0mm in mounting height, and 3.25mm in
thickness,
this board-in connector meets the needs for high-density mounting
on printed circuit
boards efficiently and economically. The connector is ideal for
VCRs, car stereo systems,
audio products and many other consumer oriented electronic
products.
• Compact
• Housing lances
• Easy mounting onto printed circuit boards
• Two types of contacts(terminals)
3, Related drawing and report
Folllowing pictures are out testing report and exact engineering
drawing for your information, please kindly check it, wish it can
help you to get what you really need.
Mechanical Performance
| Test Description | Procedure | Requirement |
| 5-1 | Actuator Insertion & Withdrawal Force to P.C.B | Insert and withdraw at the speed rate of 25±3mm / minute to
P.C.Board. (Per single circuit,Initial) | Insertion | 1.0kgf max. |
| Withdrawal | 0.1kgf min |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#24 | 3.0kgf (Min) |
| AWG#26 | 2.0kgf (Min) |
| AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) |
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 1.00kgf (Min.) |
| 5-5 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute. | Contact Resistance 10mΩ (Max.) |
| 5-6 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 10mΩ (Max.) Discontinuity 1 μsec.(Max.) |
| 5-7 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS
C0041/MIL-STD-202 Method 213B Cond. A) |
4, Application fied of product
This product is very ideal for VCRs, car stereo system, audio parts
and many other consumer oriented electronics product. It is with
strong structure against external force. And it is wildly seted in
most of household appliance, computer, communication device. We
also can controll defective rate under a low value, so our prodcut
are welcomed and trusted by famouse and international company like
TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD
etc. And the all products are certificated by REACH, UL, RoHS. In
order to protect the evironment, some parts are halogen free.
