Dual Row connector wire to wire Wafer Black Color With Lock PA66
Material
1, Detailed part information as below
1. Basic information:
- Color: Black
- Housing Material: Nylon66
- Flammability: 94V-0/2
- Pitch: 3.00mm
- Circuits: 2 to 24 positions
- Row No.: Dual or double
- Insulation O.D.: 1.85mm max
- Mounting type: wire to wire
- Application: Power, wire to wire
- Terminal materials: Phosphor bronze
- Finish terminal: Tin-plated or gold-flash
- Terminal Package: 10Kpcs/reel
- Suitable terminal: C3030F series
- Mates parts: C3030HM series dual row housing or C3030 series dual
row wafer
- Terminal processing method: E-stamping before tin-plated
2. Electrical characteristic:
- Current Rating: 5A AC DC
- Voltage Rating: 250V AC, DC
- Contact Resistance: 10mΩ Max
- Insulation Resistance: 1000mΩ
- Withstanding Voltage: 1500V AC/minute
3. Mechanical characteristic:
- Temperature Range:-25°C ~+85°C
- Terminal Insertion Force: 1.50kgf (Max.)
- Terminal/Housing Retention Force: 2.50kgf (Min.)
- Pin Retention Force: 1.50kgf (Min.)
- Latch Yield Strength: 7.0kgf (Min.)
Other information please kindly check the following picture.
2, Introduction for this series products
Please kindly notice that the C3030 series product, you can buy it
as a set, then we will offer you reasonable price.
| C3030 series product |
| Terminal | C3030F-T-A and C3030M-T |
|
| Connector | Male housing | C3030HF-NP & C3030HF-2XNP &C3030HFA-2XNP |
| Female housing | C3030HM-NP & C3030HMA-NP &C3030HM-2XNP & C3030HMA-2XNP |
|
Wafer
| Vertical type | C3030WV-F-NP &C3030WV-F-2XNP |
| Right angle type | C3030WR-F-XP & C3030WR-F-2XNP |
3, Related drawing & testing report
Below file is our engineering drawing and testing report for
further information. It's sure that it will be a
good reference for you to know this series parts clearly.
Dimension drawing
Testing report
The attached pictures can let you know the performance of this
product well. You will make your decision quickly via it.
Environmental Performance And Others
| Test Description | Procedure | Requirement |
| 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
| 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond.
A) | Appearance No Damage. Contact Resistance 20mΩ (Max.) |
| 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) |
| 6-4 | Humidity | Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 20mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
| 6-5 | Temperature Cycling | 5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 20mΩ (Max.) |
| 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt
spray from the 5±1% solution at 35±2℃. (Based upon JIS
C0023/MIL-STD-202 Method 101D Cond. B) |
| 6-7 | SO2 Gas | 24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. |
| 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia
solution. |
4, Our main customer and partner
It's no doubt that you can trust us like the world class 500
enterprise. It's sure that we will regard you as well as them, to
support our best service and products. So please contact me
directly, we are waiting for you. Come on!
