16 19 25mm Thickness Laboratory Bench Top Resistant to strong acid
and alkali
Description :
Super corrosion resistance
Our products are Monolithic epoxy resin, from inside to outside,
from top to bottom. Epoxy resin, curing agent and high purity
ultrafine quartz powder are mixed and moulded, then baked at high
temperature and molecular crystalline, our board is integral curing
and will not delaminate. If there is a chemical reagent drop to
mesa, wipe it as long as 24 hours , no reagents will be left on
worktop.
ONUS has been manufacturing and selling Epoxy Resin worktop,
including laboratory fume hoods epoxy resin, since 2006.
After more than 10 years of development, ONUS has accumulated a
number of patented technologies, also passed more than 20
industrial standard tests of SGS, the state building materials test
center and other authoritative organizations. If you need please
contact us.
Specification:
| No. | Test Item | Test Method | Result |
| 1 | Water Absorption | ASTM D750-98(2010)e1 | 0.031% |
| 2 | Deflection Temperature Under Load | ASTM D648-07
Method B | 262℃ |
| 3 | Flexural Strength | ASTM D790-10
Method A | 12200psi |
| Flexural Modulus | 2350000psi |
Advantages :
1. Repairability : All of our products are monolithic epoxy resin, if there are some
scratches on the surface, it can repaired with the sand paper
polishing.
2. Molded : The molded marine edge is easy to clean and install for user, due
to the smoothly and non-porous surface, it won’t hidden bacteria
and guarantee the worktops have long life.
Thanks for visiting, more information please contact with us.
