Laboratory Work Bench Epoxy Resin Surfaces With Marine Edge and
Matte
Description :
Our epoxy resin products include slabs, work surface for fume hood,
sink and cupsink. We have many of sizes and colors for you to
choose. Of course, clients can customize the special epoxy resin
worktops according to their unique usage in our company. All of our
products are monolithic epoxy resin, it has good advantages on
resisting heat and chemcials, we are have top quality in China.
All of our basin station worktops are monolithic epoxy materials,
there are molded marine edge to stop spill chemicals. The common
color is black, we can also customize color according to client’s
need. The surface is glare finish, we can change to matt surfaces
if customer request.
Advantages of this one is easy to install and clean. Of course, it
has perfect properties on resisting chemicals and heat.
Specification:
| Chemical Test Results for Black |
| No. | Chemical Reagent | Actual Rating |
| 1 | Acetate,Amyl | 1 |
| 2 | Acetate,Ethyl | 1 |
| 3 | Acetic Acid,98% | 1 |
| 4 | Acetone | 1 |
| 5 | Acid Dichromate,5% | 0 |
| 6 | Carbon Tetrachoride | 1 |
| 7 | Chloroform | 1 |
| 8 | Chromic Acid,60% | 1 |
| 9 | Cresol | 0 |
| 10 | Formaldehyde,37% | 0 |
| 11 | Formic Aicd,90% | 0 |
| 12 | Furfural | 0 |
| 13 | Gasoline | 0 |
| 14 | Hydrofluoric Acid,37% | 1 |
| 15 | Hydrofluoric Acid,48% | 3 |
| 16 | Hydrogen Peroxide,30% | 0 |
| 17 | Lodine,Tincture of | 0 |
| 18 | Methyl Ethyl Ketone | 0 |
| 19 | Methylene Chloride | 1 |
| 20 | Mono Chlorobenzene | 1 |
| 21 | Naphthalene | 0 |
| 22 | Nitric Acid,20% | 0 |
| 23 | Nitric Acid,30% | 0 |
| 24 | Nitric Acid,70% | 0 |
| 25 | Phenol,90% | 0 |
| 26 | Phosphoric Acid,85% | 0 |
| 27 | Silver Nitrate,Saturated | 0 |
| 28 | Sodium Hydroxide,10% | 0 |
| 29 | Sodium Hydroxide,20% | 0 |
| 30 | Sodium Hydroxide,40% | 0 |
| 31 | Sodium Hydroxide,Flake | 0 |
| 32 | Sodium Sulfide,Saturated | 0 |
| 33 | Sulfuric Acid,33% | 0 |
| 34 | Sulfuric Acid,77% | 0 |
| 35 | Sulfuric Acid,96% | 3 |
| 36 | Sulfuric Acid,77% and Nitric Acid 70%,
equal parts | 0 |
| 37 | Toluene | 0 |
| 38 | Trichloroethylene | 1 |
| 39 | Xylene | 0 |
| 40 | Zinc Chloride, Saturated | 0 |
| Rating scale: | Level 0--No detectable change |
| Level 1--Slight change in color or gloss |
| Level 2-- Slight surface ething or severe staining |
Level 3--Pitting,cratering,swelling, or erosion of coating.Obvious
and significant
deterioration |
| Acceptance level: | Laboratory grade finishes shall result in no more than four level 3
conditions.
Suitability for a given application is dependent upon the chemicals
used in a given laboratory |
Physical Test :
- Compressive Test : 24000psi
- Deflection Temperature Under Load : 262℃
- Density : 133.8lb/ft3
- Flexural Strength : 12200psi
- Flexural Modulus : 2350000psi
- Rockwell Hardness : HRM98.3
- Water Absorption : 0.031%
- High Temperature Resistance Test : No bubbles, rupture, deformation
on the surface
- Fire Resistance Test : No bubbles, rupture, crack on the surface
Advantages :
1. Safety: After SGS tested, ONUS products have no formaldehyde or any of
noxious materials, it is safety for the user.
2. Heat Resistance : ONUS’s worktop can resist 262℃ , it won’t foam and crack, the fire
can extinguish because it has no any of paper materials.
3. Mositure Resistance : Due to our products are monolithic, it won’t swell and distortion
on the mositure area.
4. Reagents Resistance : ONUS’s product can resist many of chemical reagents, it won’t been
corrode by the most of chemicals.
Application:
Epoxy resin worktops are use in all kinds of laboratories. In view
of the rigid request for laboratory, epoxy resin worktops are vey
popular in laboratory industry, it is the best choice for lab
staff. The laboratory include the following:
- University
- R&D
- Government
- Medical
- Enterprise
